Advertisement
Connecting the Car Power Cable
Use the dedicated Car Power Cable (DT-827CAC) sold separately for connecting the Car Mounted
Battery Charger (HA-B30CHG with HA-B34AT installed) to the cigarette lighter in your car.
1
After first checking to make sure the power
of the Handheld Printer Terminal is OFF,
plug the Car Power Cable into the AC
adaptor jack on the back of the Car Mounted
Battery Charger.
2
Plug the Car Power Cable into the cigarette
lighter socket of a 12/24 V DC vehicle.
3
Turn on the power. The power indicator lamp
on the Car Mounted Battery Charger lights in
red.
4
The power terminals on the bottom of the
Handhled Printer Terminal are in contact
with the power terminals of the Car Mounted
Battery Charger, and place the Handheld
Printer Terminal on the Car Mounted Battery
Charger until it clicks into place. This causes
the power indicator on the Car Mounted
Battery Charger to light in green.
The indicator on the Handheld Printer
Terminal changes from red to green when
charging is complete.
When removing the Handheld Printer
Terminal, press the removal buttons on the
left and right sides of the Car Mounted
Battery Charger.
HA-B34AT̲P09-14.p65
Power Switch(OFF)
Power Contacts
Page 13
Car Mounted Battery
Charger
(HA-B30CHG
with HA-B34AT
installed)
Power Indicator Lamp
POWER
Removal Buttons
Power Switch (ON)
2004.9.7, 10:30 AM
13
Adobe PageMaker 6.5J/PPC
Advertisement
