Table of Contents
Advertisement
SERVICE MANUAL
Model:
CHM5BPL3/CHM7BPL2
Chapter 5 Control and display system
5-1. Control panel
To prevent temperature being accidentally modified, the control is
intentionally resistant to turning.
To switch on: Turn the control to the right adjust temperature to
1. the level you require, between:
Min(slight cooling) and max (Lowest temperature)
If the appliance is equipped with indicator-lights, the following
guide explains what is meant by each light up:
- Green = CONTROL
The appliance is under current and operating
The green control light must always be on when the appliance is
connected to the mains and switched on. It is very important to
pay attention to this, because in the event of a power failure,
the red and yellow lights stop operating and do no longer provide
a warning.
- Red = RUNNING
Issue
Rev.
13
Advertisement
Table of Contents
