Adjust The Earpiece/Speaker Volume; Mute The Microphone; Turn The Speaker On Or Off; Make A Second Call - Philips Mira M565 Extended User Documentation

• Place the handset to the base
station or charging cradle.
Adjust the earpiece/
speaker volume
Press /
during a call.
» The earpiece/speaker volume is
adjusted and the phone is back
to the call screen.

Mute the microphone

1
Press during a call.
» The handset displays [Mute on].
» The caller cannot hear you, but
you can still hear his voice.
2
Press again to unmute the
microphone.
» You can now communicate with
the caller.

Turn the speaker on or off

Press .

Make a second call

Note
•
This service is network dependent. Check with
your network provider for operation.
1
Press during a call.
» The first call is put on hold.
2
Dial the second number.
» The number displayed on the
screen is dialed out.
to adjust the volume

Answer a second call

Note
•
This service is network dependent.
When there is a periodical beep to
notify you of an incoming call, you can
answer the call in these ways:
1
Press and
» The first call is put on hold, and
you are now connected to the
second call.
2
Press and
call and answer the first call.

Switch between two calls

Note
•
This service is network dependent. Check with
your network provider for operation.
Press and .
» The current call is put on hold,
and you are now connected to
the other.
Make a conference call
with the external callers
Note
•
This service is network and country
dependent. Check with the service provider for
operation and additional charges.
When you are connected to two calls,
press , then .
» The two calls are combined and
a conference call is established.
to answer the call.
to end the current
EN 13