Panasonic SA-XR15E Service Manual page 9

- This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
- For reassembly after operation checks or replacement, reverse the
respective procedures. Special reassembly procedures are
described only when required.
Contents
- Checking for the Main PCB and DSP PCB
- Checking for the Input output PCB
- Checking for the Power Supply PCB
8.1. Checking for the Main P.C.B. and DSP P.C.B.
Steps 1 and 2 : Remove all the screws.
Step 3 : Remove the top cover.
Step 4 : Remove the Lead Cramper.
9