Continue Mode/Stop Mode Settings Of Toner Cartridge; Drum Cleaning Function - Brother HL-2230 Service Manual

3.5

Continue Mode/Stop Mode settings of Toner Cartridge

You can switched to the "Continue mode" that usable toner cartridge after displaying the
"Replace Toner" in the LED.
<Procedure>
(1) Press the [Go] button seven times in the ready state. The Continue mode and Stop
mode settings of the toner cartridge are switched. It is switched to a set value opposite to
a current set value, whenever switching. You can verify the setting change by LEDs
when releasing the [Go] button. When the setting is completed, the printer return to the
ready state.
All LEDs light two times Stop mode
All LEDs light once
Note:
• Printing is not guaranteed in the continue mode.
• If the toner cartridge is replaced, the printer returns to the default setting.
3.6

Drum Cleaning Function

<Procedure>
(1) Check that the front cover and Back cover are opened in the ready state, and press the
[Go] button five times. Shift to the "Drum Cleaning mode".
(2) Close the front cover. Install the plain paper in the manual feed slot to start the paper
feeding, and perform the "Drum Cleaning". When the cleaning is completed, the printer
automatically return to the ready state.
CAUTION :
• When the error of jam during the Drum Cleaning, Drum Cleaning mode is canceled
automatically and becomes the error display.
LED
Continue mode
Settings of Continue mode/Stop mode
→
Continue mode
→
Stop mode
5-22
Confidential