Table of Contents
Advertisement
15 Frequently
asked
questions
My handset displays [SEARCHING] or
[UNAVAILABLE], or [UNREGISTERED],
what do I do??
•
Make sure that the base station
has power supply.
•
The handset is out of range. Move
it closer to the base station.
•
The handset is not paired with the
base. Register the handset to the
base station.
Tip
•
For further information, see 'Register the
handset or additional handsets' on the
Services section.
If I fail to pair (register) the additional
handsets to the base station, what do
I do?
•
Your base memory is full.
Unregister the unused handsets
and try again (see 'Unregister
handsets' on page 39).
•
If registration fails, unplug the
power adapter from the base
station and plug it back. Wait
for 15 seconds, and then repeat
the registration procedure (see
'Register the handset or additional
handsets' on page 39)
36
The range is short. How can I improve
it?
The range is subject to environmental
factors, like electrical devices or walls
in between.
•
Move the base station to another
corner/room.
•
Move the base station away from
other electrical appliances nearby
that could interfere with the range
(like routers, TV, radio, etc.).
•
Do not put the base station on a
metallic desk or a metallic table
top.
I have chosen a wrong country in
Welcome screen, what do I do?
Reset your phone settings to the
original factory settings (see 'Restore
default settings' on page 40).
I have chosen a wrong language which
I cannot read, what do I do?
1
Press
to go back to the standby
screen.
2
Press MENU/OK to access the
main menu screen.
3
Select [PHONE SETUP] >
[LANGUAGE], then you see one of
the following texts appear on the
screen:
CONFIG. TÉL > LANGUE
PHONE SETUP > LANGUAGE
TEL.-SETUP > SPRACHE
CONF. TELEF. > LINGUA
4
Select it to access the language
options.
5
Select your own language.
Advertisement
Table of Contents
