Related Manuals for Zenith L17V36DVD
Summary of Contents for Zenith L17V36DVD
- Page 1 Operating Guide | Warranty Model Number | L17W36DVD | LCD TV © Copyright 2003, Zenith Electronics Corporation.
-
Page 2: Warnings
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. COMPLIANCE: The responsible party for this product’s compliance is:... -
Page 3: Safety Instructions
Safety Instructions Safety Instructions Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential elec- trical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. - Page 4 Safety Instructions Safety Instructions continued Safety Instructions continued 14. Outdoor Antenna Grounding 19. Servicing If an outside antenna or cable system is connected to the Do not attempt to service this product yourself as opening or product, be sure the antenna or cable system is grounded so removing covers may expose you to dangerous voltage or as to provide some protection against voltage surges and other hazards.
-
Page 5: Table Of Contents
Contents Contents Contents Warnings ........2 Special Menu Options Safety Instructions . -
Page 6: Product Overview
Product Overview Product Overview Product Overview Controls Controls Menu Button Channel Buttons Enter Button TV/Video Button Volume Buttons On/Off Button on/off tv/video menu enter Stop Button: Stops playback stop Play/Pause Button: Start or pause playback play/pause Skip/Scan Button: Starts playback from skip/scan the selected chapter or track... - Page 7 Product Overview Connection Options Connection Options Headphone Jack S-Video Input Video Input Audio Input DC IN (15V) OPTICAL PC INPUT ANT IN VIDEO SOUND DIGITAL DVD OUT COMPONENT(480i/480p/720p/1080i) AUDIO SOUND DVD/DTV IN DVD Video Output PC Input DC 15V Input* *Use with AC adapter.
-
Page 8: Remote Control Key Functions
Product Overview Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. TV/VIDEO POWER Switches the TV between Selects: Video S-Video ON and STANDBY. Component , or RGB-PC power mode. -
Page 9: Installation
Installation Installation Installation Accessories Accessories power open/close tv/video mute mts/audio cc/sub-t pip ch pip ch pip swap pip input menu exit enter video audio 3D sound a r c fcr/zoom skip play/pause /II skip scan stop scan disc menu title menu program 1.5V repeat... -
Page 10: Installation Instructions
Installation Installation Instructions Installation Instructions Rear A/V Cover Rear A/V Cover ire Holders ire Holders * The connection panel is hidden behind the A/V cover. - Thread, then pull the wires through the hole on the TV stand. a. Remove the cover. b. -
Page 11: External Equipment Connections
Installation External Equipment Connections External Equipment Connections Antenna Connection Antenna Connection - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten. -
Page 12: Vcr Setup
Installation External Equipment Connections Continued External Equipment Connections Continued VCR Setup VCR Setup Connection 1 Set VCR switch to 3 or 4 and then tune TV to the same channel number. OPTICAL PC INPUT ANT IN SOUND DIGITAL SOUND Connection TV Back Panel 1. -
Page 13: Dvd Setup
Installation DVD Setup DVD Setup - This TV can play a DVD without other DVD player. However, if you do watch a DVD from other DVD player, refer to the figure as shown right. Connections OPTICAL PC INPUT ANT IN VIDEO +75 Ω... -
Page 14: Dvd Output Setup
Installation DVD Output Setup DVD Output Setup The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TV’ DVD OUTPUT OPTICAL PC INPUT ANT IN VIDEO +75 Ω... -
Page 15: Operation
Operation Operation Operation * In this manual, the OSD (On Screen Dispaly) may be different from your TV’s because it is just example to help the TV operation. TV Operation Overview TV Operation Overview 1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. -
Page 16: Channel Menu Options
Operation Channel Menu Options Channel Menu Options Memorizing the Channels with EZ Scan Memorizing the Channels with EZ Scan - For EZ scan to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider. -
Page 17: Picture Menu Options
Operation Picture Menu Options Picture Menu Options EZ V ideo EZ V ideo - Adjusts the TV for the best picture appearance. 1. Press the video button repeatedly to select the picture appearance setup option as shown below. Clear Optimum Soft User •... -
Page 18: Manual Color Temperature Control
Operation Picture Menu Options Continued Picture Menu Options Continued Manual Color emperature Control ( option) Manual Color emperature Control ( User option) - You can adjust red, green, or blue to any color temperature you prefer. 1. Press the menu button and then use D / E button to select the Picture... -
Page 19: Sound Menu Options
Operation Sound Menu Options Sound Menu Options Audio Audio - The TV selects the appropriate sound option based on the program content; so can you enjoy the best sound without any special adjustment. 1. Use the audio button to select the appropriate sound setup as shown below. Flat Music Movie... -
Page 20: Sound Source In Pc Mode
Operation Sound Menu Options Continued Sound Menu Options Continued Sound source in PC mode Sound source in PC mode - Be sure to select the RGB-PC source and turn on the PIP before operation. Press the menu button and then use button to select the D / E Sound... -
Page 21: Time Menu Options
Operation ime Menu Options ime Menu Options Auto Clock Setup Auto Clock Setup - The time is set automatically from a PBS (Public Broadcasting Station) signal. - The PBS channel signal includes information for the correct time and daylight saving time. 1. -
Page 22: On/Off Timer Setup
Operation ime Menu Options Continued ime Menu Options Continued On/Of On/Of imer Setup imer Setup - Timer function operates only if current time is set. - Off-Timer function overrides On-Timer function if they are set to the same time. - The TV must be in standby mode for the On-Timer to work. - If you don’t press any button within 2 hours after turning on the TV with the On-Timer function, the TV will automatically revert to standby mode. -
Page 23: Special Menu Options
Operation Special Menu Options Special Menu Options Closed Captions Closed Captions Closed captioning is the process that converts the audio portion of a television program into written words which then appear as sub- titles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions Captions are the subtitles of the dialogue and narration of television programs. -
Page 24: Captions
Operation Special Menu Options Continued Special Menu Options Continued Captions Captions 1. Use the cc button repeatedly to select Captions. EZ Mute • You can also select Captions in the Special menu. • shows the selected captions option (if available on program) when the TV sound is muted. Ez Mute •... -
Page 25: Lock Menu Options
Operation Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and external auxiliary viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be shown without restriction. -
Page 26: Lock Menu Setup
Operation Lock Menu Options Continued Lock Menu Options Continued Lock Menu Setup Lock Menu Setup 1. Press the menu button and then use D / E button to select the Lock menu. Lock Press the button. Lock on/off • If is already set, enter the password as requested. -
Page 27: Rgb-Pc Source Menu Options
Operation RGB-PC Source Menu Options RGB-PC Source Menu Options - Be sure to select the RGB-PC source before operation. Auto Config. Adjustment Auto Config. Adjustment - Automatically adjusts picture position and minimizes image shaking. - If the image is still not correct, your TV is functioning properly but needs further adjustment. 1. -
Page 28: Pip (Picture-In-Picture) Feature
Operation (Picture-in-Picture) Feature (Picture-in-Picture) Feature - PIP lets you view 2 different pictures (2 sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - Double Window splits the screen into 2 equal parts, allowing 2 picture sources to be shown side-by-side on the TV screen at the same time. -
Page 29: Swapping The Pip
Operation Swapping the PIP Swapping the PIP Press the pip swap button to switch the main and sub pictures. Main Picture Sub Picture Selecting an Input Signal Source for PIP Selecting an Input Signal Source for PIP Use the pip input button to select the input source for the sub picture. Each press of pip input button changes the PIP source. -
Page 30: Notes On Discs
Notes on Discs Notes on Discs Notes on Discs Handling Discs Handling Discs Notes • If an MP3 or JPEG file CD is created using an incorrect • Do not touch the playback side of the disc. method, the player may not be able to recognize it. If this •... -
Page 31: Dvd & Vcd Operation
DVD & VCD Operation DVD & VCD Operation DVD & VCD Operation Basic Playback Basic Playback 1. Press the power button to turn the unit on. 2. Slide your chosen disc into the disc slot on the side panel. Be sure to face the top of the disc (with title etc.) toward the front of the screen. - Page 32 DVD & VCD Operation OSD (On-Screen Display) OSD (On-Screen Display) - You can display the playback status on TV screen as following; Title, Chapter num- ber, Playing time. 1. Press the enter button during DVD playback. Title, Chapter information appears on screen.
- Page 33 DVD & VCD Operation Program playback Program playback - You can arrange the order of playback for tracks on a disc. TT 01/03 CH 01/09 0:28:22 Program : TT (02)/CH(- -) 1. Press the program button in the stop mode or during playback. 0 6 TT: 2.
-
Page 34: Dvd Menu Options
DVD & VCD Operation DVD Menu Options DVD Menu Options Selecting an audio language Selecting an audio language - Select your preferred audio language. If an audio language is selected, the selected audio language is played whenever you start a new disc playback. (The disc must contain the selected language ) - You can also select another available audio language during playback with the audio button on the remote control during playback. - Page 35 DVD & VCD Operation Parental Control Setup Parental Control Setup - Use to block viewing of unsuitable discs. 1. Press the menu button twice and then use the button to select Rating Level Audio Language 2. Press the button and then use number buttons to key in a 4-digit password. Subtitle Language Be sure to remember the password! Menu Language...
- Page 36 DVD & VCD Operation DVD Menu Options Continued DVD Menu Options Continued Disc OSD language selection Disc OSD language selection - The onscreen display can be shown on the screen in your specified language. 1. Press the menu button twice and then use the button to select Language 2.
-
Page 37: Mp3 Files Operation
MP3 Files Operation MP3 Files Operation MP3 Files Operation MP3 File Playback Options MP3 File Playback Options 02 : 30 03 : 37 128K 1. When inserted, the MP3 menu screen appears automatically depending on the 001 / 011 MP3 disc’s folder (directory) structure as shown to the right. 2. -
Page 38: Audio Cd Operation
Audio CD Operation Audio CD Operation Audio CD Operation OSD (On-Screen Display) OSD (On-Screen Display) - You can display the Track, and Playback time status on the TV screen. Single Elapse 1. Press the enter button during DVD playback. Track information appear on screen. Each time you press the enter button, the OSD changes as follows: Track 01/21... -
Page 39: Jpeg File Viewing Options
JPEG File Viewing Options JPEG File V iewing Options JPEG File V iewing Options - As a JPEG file is loaded, the table of contents appears on the TV screen. 16 slide show transition modes are available. Picture Selection Picture Selection 1. -
Page 40: Troubleshooting Checklist
Troubleshooting Checklist roubleshooting Checklist roubleshooting Checklist SYMPTOMS No power No picture or sound Poor picture but good sound Poor reception Lines in picture Ghosts (multiple images) Remote control does not work. Cannot tune desired channel. CHECK THESE THINGS Is power cord plugged in ? Is television turned on ? Check batteries in remote control. -
Page 41: Maintenance
Maintenance Maintenance Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Cleaning the Screen 1. -
Page 42: Product Specifications
Product Specifications Product Specifications Product Specifications MODEL L17W36DVD Power Requirements* DC15V/4.5A Adapter (AC to DC Power) In: AC 100-240V ~ 1.6A-0.7A, 50/60Hz Out: DC 15V, 4.5A * For use only with Model No. SAD7015SE AC Adapter, manufactured by H & E CO., LTD. Television System NTSC Television Channels... - Page 43 Notes Notes Notes...
-
Page 44: Warranty
LCD-TV L17W36DVD LIMITED WARRANTY – USA Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or work- manship under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original purchase of the product.