Advertisement
3.1.18 Removing the cam plate R
(See Fig.25)
• Remove the top cover, base board, chassis unit, clamper as-
sembly, top plate assembly and loading roller assembly.
From the right side of the chassis unit, remove the cam plate R
from the slots ax of the chassis unit.
Reference:
When a slide hook rivet assembly and a trigger rack spring
have come off from the chassis unit, attach them before at-
taching the cam plate R.
3.1.19 Removing the trigger rack plate
(See Figs.25 and 26)
• Remove the top cover, base board, chassis unit, clamper as-
sembly, top plate assembly, loading roller assembly and cam
plate R.
(1) Remove the slide hook rivet assembly and trigger rack
spring from the chassis unit. (See Fig.25.)
(2) From the bottom side of the chassis unit, pull out the load-
ing gear 1. (See Fig.26.)
(3) Remove the trigger control spring from the sections (ay,
az). (See Fig.26.)
(4) Take out the trigger rack plate from the chassis unit. (See
Fig.26.)
Reference:
When attaching the trigger rack plate, insert the projection a'
of the chassis unit in the slot b' on the bottom side of the trigger
rack plate as before. (See Fig.26.)
Chassis unit
Slide hook rivet assembly
ax
Cam plate R
ax
Fig.25
Trigger control spring
b'
a'
Trigger
rack plate
ay
Trigger rack plate
Loading gear 1
Chassis unit
Fig.26
Trigger rack spring
az
(No.MY003)1-17
Advertisement
