Table of Contents
Advertisement
Rinse aid indicator
When the Rinse Aid indicator lights up,
the rinse aid reservoir contains suffi-
cient rinse aid for 2 - 3 programs only.
Add rinse aid.
If you only ever use combination prod-
ucts in your dishwasher, you can
switch both refill indicators for salt and
rinse aid off if you wish (see "Options -
Refill indicators").
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage is set in stages
from 0 to 6. It is set to 3 at the factory.
This is the recommended setting.
If spots appear on dishware and glass-
ware:
Increase the rinse aid dosage.
If clouding or smearing appears on
dishware and glassware:
Decrease the rinse aid dosage.
Before using for the first time
Turn the dishwasher off with the
button, if it is turned on.
Press the Start button and, simulta-
neously, switch the dishwasher on
using the button.
Keep the Start button pressed for at
least four seconds until the Start indi-
cator light comes on.
If this does not happen, start the proce-
dure from the beginning again.
Press the button 3 times.
The indicator light will flash 3 times
at short intervals.
The set value will appear in the display
after .
The flashing sequence will appear in
the display.
This indicates a factory default setting
of 3.
Use the Start button to select the set-
ting required.
Each press on the button moves you
up a level. After reaching the highest
value, the counter starts from the be-
ginning again.
The setting is now saved.
Turn the dishwasher off with the
button.
25
Advertisement
Table of Contents
