Selecting the HDMI 4K signal format (4K MODE)
4K MODE
MODE 1
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
Settings
Inputs/outputs 4K signals shown in the table below.
MODE 1
Depending on the connected device or HDMI cables, video may not be displayed
correctly. In this case, select "MODE 2".
MODE 2
Inputs/outputs 4K signals shown in the table below.
Format
RGB 4:4:4
YCbCr 4:4:4
4K/60, 50 Hz
YCbCr 4:2:2
YCbCr 4:2:0
RGB 4:4:4
4K/30, 25, 24 Hz
YCbCr 4:4:4
YCbCr 4:2:2
Y
• When "MODE 1" is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with
Ethernet.
• Regardless of the setting, 4K signals are input as "MODE 2" for the VIDEO AUX (HDMI IN) jack.
MODE 1
MODE 2
8 bit
10 bit
12 bit
8 bit
10 bit
,
-
-
,
-
-
,
-
,
,
,
,
,
,
,
,
Switching the DTS format notification setting (DTS MODE)
DTS MODE
Switches the DTS format notification setting.
This setting informs the video device (such as BD/DVD player) about the DTS formats that the
unit supports.
Settings
MODE 1
MODE 2
Backing up/recovering the settings (RECOV./BACKUP)
12 bit
RECOV./BACKUP
-
Creates backup of the settings of the unit, or recovers the settings from the backup.
-
■
Backup/recovery procedure
-
1
Press STRAIGHT repeatedly to select "BACKUP" or "RECOVERY" and press INFO to start the
process.
Choices
BACKUP
RECOVERY
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).
144
En
MODE 1
This mode conforms to the DTS:X standard.
Use this setting under normal circumstances.
Use this setting if the video device (such as BD/DVD player) fails to properly
output a DTS signal even when it is playing back DTS-HD or DTS:X content.
BACKUP
Creates backup of the settings of the unit in the internal memory.
Recovers the settings of the unit from the backup (available only when
backup has been created).