HIKVISION DS-2TD2336-75 Quick Start Manual page 29

face waterproof endcap), and the water-proof endcap ④ in
order.
2. Crimp an RJ-45 network plug ③onto the end of the cable,
taking care to insert the twisted pairs of wires in correct
order.
3. Place the O-type gasket ② onto the end of the camera's
network interface socket ①.
4. Insert the network plug ③ into the camera's network
interface socket①.
5. Insert the water-proof rubber gasket ⑤ into the waterproof
endcap ④, and secure lock nut ⑥ with the water-proof
endcap ④.
6. Align the snap on the water-proof endcap ④ with the notch
on the camera's network interface socket ①, and then
secure the water-proof endcap ④ to the camera's network
interface socket ① to finish installation.
[20]