Cutting Roll Paper; Attaching The Belt Clip - Brother RuggetJet RJ4030 User Manual

Cutting Roll Paper

Roll paper can be cut using the printer's tear
bar. Pull one edge of the ejected paper up
and toward the other edge diagonally.
The tear bar is sharp. To avoid injury, do
not touch the tear bar.

Attaching the Belt Clip

1
When using the printer outside the office, you
can attach the included belt clip to the printer
and secure the belt clip to your belt.
a
Secure the Phillips-head screws to the
rear of the printer as shown.
2
1
1 Belt clip
2 Phillips screw
b
Attach the clip to your belt.
Setting Up the Printer
1
1
7