Hitachi TB-1R User Manual page 18

4. Saving Drawings
Saves the image on the projector screen, along with any text or pictures drawn, onto a
USB memory device connected to the projector.
Files are saved with the ¿ le name "Pxxx.bmp" (where xxx is a consecutive number)
into a folder named "PJ_Capture". If it does not already exist, a "PJ_Capture" folder is
created automatically.
NOTE
• Copyright protected images cannot be saved.
• If more than one USB memory device are connected to the projector, and an image is
being displayed from a USB memory device, that USB memory device is selected to
save to. If the image is being displayed from somewhere other than a USB memory
device, it selects the ¿ rst USB memory device detected to save to.
• Before removing a USB memory device with ¿ les saved to it from the projector, be
sure to run the projector's "REMOVE USB" function. The time stamp of saved ¿ les
are as per the date and time settings of the projector. If you do not run the "REMOVE
USB" function and remove the USB memory device, the time stamp may not be
recorded correctly. For more details, refer to the user's manual of the projector.
• Nothing drawn using this function is saved to the projector's "MyScreen". For more
details, refer to the user's manual of the projector.
5. Tablet Status Display
Displays the tablet's signal strength and remaining
battery power.
6. Exit Drawing Mode
Closes the tool bar and exits the drawing function.
NOTE
• Any unsaved drawings are lost when the drawing mode is exited.
01TB-1̲Eng.indd 18 01TB-1̲Eng.indd 18
Using the Tablet
18
Fig. 7 Status display
2011/11/11 14:57:54 2011/11/11 14:57:54