Black & Decker MD-TC6006W Use And Care Manual page 8

OPERATING YOUR SLOW COOKER WITH THE APP
1. Add ingredients to the stoneware pot and cover with glass lid.
2. Once set up, your connected device will appear on the home screen of the app.
Note: when the slow cooker icon is GREEN this means it is enabled and
ready to cook. Red means the slow cooker is in an error state and may need
attention. Grey means that the wireless connection is offline.
3. Click on the bar showing the Wi-Fi enabled slow cooker in order to control the
device. This will automatically take you to the standard cooking program.
4. Standard Cooking Program: This screen allows you to change the temperature
and time by selecting the temperature and time. Once desired cook program is
selected, press "Set" and the program will be sent to the slow cooker and will
start cooking.
Advanced Cook Program: This allows you to create a more complex cooking
program, with three steps instead of just two. Toggle back and forth between
Advanced cook or Standard cook by pressing the program name at the bottom
of the screen.
5. If you ever want to modify your cook time or temperature; go to the cook
program on the desired slow cooker, stop the cooking, set the new desired
program, and then press "Set" to send new commands to the slow cooker.
Note: Unplug the appliance when not in use and always allow the slow cooker to
completely cool before cleaning.
OPERATING YOUR SLOW COOKER WITHOUT THE APP
To disable the Wi-Fi and still use the unit: press "Select"
and "Time" at the same time for 1–3 seconds. (G) This
disables Wi-Fi, causing the Wi-Fi light to turn off. To re-
enable, press "Stop" and "Start" at the same time. (H)
1. Add ingredients to the stoneware pot and cover with
glass lid.
2. Plug in the appliance. The slow cooker will beep once
and the main control will display dashes (----). This
indicates that the slow cooker is ready to be set.
3. To set the cooking temperature, press the "Select"
button until the setting you want lights up.
4. To set the cook time, press the "Time" button until the
desired time shows on the display. The slow cooker
timer sets in 30 minutes increments (minimum time is
30 minutes and max time is 10 hours)
5. Press the "Start" button. The slow cooker will beep
and begin heating, indicated by the colon blinking in
the time countdown.
6. When the cook time is done, there will be five double beeps and the unit will
switch automatically to warm. It will stay on warm for 4 hours. Then it will
switch itself off.
8
G
H