4.0
POWER AND SIGNAL
4.1
CHANGING OPERATING VOLTAGE
Remove power lines from the meter, then remove the meter from the case.
OPERATING VOLTAGE
230 V ac ±15% (Option C1)
115 V ac ±15% (Standard)
4.2
POWER AND SIGNAL CONNECTIONS
The voltmeters are factory-set for 115 V ac ±15% operation.
Power and signal can be connected using the D1 or D4 option.
(D4)
(D1)
Remove W8 and W9 on the transformer
Install W4 on the printed circuit board
Install W8 and W9 on the transformer
Remove W4 on the printed circuit board
Figure 4-1 Main Board
Figure 4-2 Rear Terminal
6
JUMPER INSTALLATION