Makita XT612M Instruction Manual page 129

Your tool is supplied with a guard for use with a
•
depressed center grinding wheel, multi-disc and
wire wheel brush. A diamond wheel and cut-off
wheel are also available and should only be used
with the appropriate optional guard for cutoff
wheels. If you decide to use your Makita grinder
with approved accessories which you purchase
from your Makita distributor or factory service
2
3
4
5
115 mm (4-1/2") model
1
2
3
4
5
6
7
8 Sanding lock nut 5/8-48
9
10
11
12
-
015302
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
6
7
8
Wheel Guard (for grinding wheel)
Inner flange 45
Depressed center wheel/Multi-disc
Lock nut 5/8-45
Rubber pad 100
Wheel Guard (for cut-off wheel)
Abrasive cut-off wheel/Diamond wheel
Lock nut wrench 28
center, be sure to obtain and use all necessary
fasteners and guards as recommended in this
manual. Your failure to do so could result in
personal injury to you and others.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Makita genuine battery and charger
•
1
2
9
Grip 36
Abrasive disc
Wire wheel brush
Wire cup brush
13
11
10
3
12
5
125 mm (5") model
Inner flange 45
Lock nut 5/8-45
Rubber pad 115
Sanding lock nut 5/8-48
Lock nut wrench 28