Section 1 - Introduction; Section 2 -·Unpacking Your Accelerometer - Omega ACC320 User Manual

SECTION 1 • INTRODUCTION
Thank you tor selecting our accelerometer for your application. You have
made an outstanding choice by selecting this OMEGA Engineering product
and we are glad to provide you with the best accelerometer that modern
technology can offer. This equipment has set the world standard for
excellence and should provide you with years of faithful service.
Before you use your accelerometer, please read this manual to ensure the
maximum performance of your unit. If you should have any problem with
this equipment, please call our Customer Service Department at
1 (800) 622-2378. There are customer service people available to help
you between 8:30 AM and 5:00 PM (EST) Monday through Friday.
SECTION 2 • UNPACKING YOUR ACCELEROMETER
Remove the packing list and verify that all equipment has been received. If
there are any questions about the shipment, please call OMEGA Customer
Service Department at
Upon receipt of the shipment, inspect the container and equipment for any
signs of damage. Take particular note of any evidence of rough handling in
transit. Immediately report any damage to the shipping agent.
The carrier will not honor any claims unless all shipping material is saved for
their examination. After examining and removing contents, save the packing
material and carton in the event reshipment Is necessary.
The accelerometer comes packaged i n its own protective case which may
also contain a cable (Integral or separate). Each accelerometer is equipped
with an insulating thermal boot. The boot may already be fitted over the
accelerometer and may or may not be removable depending upon the
model. The package may also contain an isolating mounting stud, spacing
washers, a magnet assembly, or other special part. Care should be taken
not to lose any part including the case which can continue to be used to
accommodate the accelerometer, accessories, and calibration data sheet.
Notice that the serial number and sensitivity of the unit is indicated on the
calibration data sheet. The data sheet also includes performance
specifications that are endorsed for the particular unit.
1-(800) 622-2378 or (203) 359·1660.
NOTE:
1