Table of Contents
Advertisement
2.6
Cable connections
•
The bundled system cables are pre-connected before shipment. You do not need to
disconnect these cables unless you will remove pre-installed components to install
additional devices.
•
Refer to Chapter 4 for detailed information on the connectors.
Standard cables connected to the motherboard
1.
24-pin ATX power connector (from power supply to motherboard)
2.
8-pin 12V power connector (from power supply to motherboard)
3.
System fan connector (from system fan to motherboard)
4.
USB connector
5.
SATA ports connectors
6.
System auxiliary panel connector (from motherboard to rear I/O board)
7.
System panel connector (from motherboard to rear I/O board)
8.
Mini-SAS HD connector (from motherboard to SATA backplane)
9.
Serial General Purpose Input/Output connectors
ASUS RS200-E9 Series
2-19
Advertisement
Table of Contents
