Related Manuals for Brother DC200
Summary of Contents for Brother DC200
- Page 1 Operation Manual Cutting Machine Product Code: 891-Z08 Be sure to read this document before using the machine.
-
Page 2: Introduction
We assume no responsibility for damages arising from earthquakes, fire, other disasters, actions of third parties, the user’s intentional or negligent operation, misuse or operation under other special conditions. ● For additional product information, visit our website at www.brother.com IMPORTANT SAFETY INSTRUCTIONS Symbols Used in This Document The following symbols are used in this document. -
Page 3: Table Of Contents
CONTENTS INTRODUCTION .......... 1 CaptureMat FUNCTION ......48 IMPORTANT NOTICE ........1 Tutorial 2 - Cutting Photographed Material ..48 IMPORTANT SAFETY INSTRUCTIONS ..1 4 APPENDIX ....... 51 Symbols Used in This Document......1 TRADEMARKS ..........1 CONSUMABLES........... 51 MACHINE FEATURES ........ -
Page 4: Machine Features
ScanNCut and DesignNCut cutting machines. 1. Install DesignNCut Manager (DesignNCut application for operation options). If you haven’t downloaded the DesignNCut Manager application please go to: Windows, OS X (Mac): http://s.brother/caqaa/ iOS (App Store): http://s.brother/caqab/ Android (Google Play): http://s.brother/caqac/ 2. Machine network settings Wireless network connection..P. -
Page 5: Getting Started
Chapter 1 GETTING STARTED PARTS AND FUNCTIONS c Grips Unit Descriptions - Front Grasped when moving the machine. d Feed Slot Roller Feeds in or out a mat. The mat is fed by the feed rollers on both sides. e Front Tray Cover Protects the feed rollers, carriage and holder. -
Page 6: Unit Descriptions - Operation Panel
Unit Descriptions - Operation Panel Included Accessories For details on the included accessories, refer to the “Included Accessories” insertion. a LCD Panel Displays the current settings, instructions for performing operations and error messages. Long messages scroll in the LCD. b Power indicator Lights up when the machine is turned on, and flashes when the machine enters the sleep mode (power- saving mode). -
Page 7: Turn On The Machine
TURN ON THE MACHINE Plug the power cord into an electrical outlet. Removing the Transport Packing Materials Press in the operation panel. Before turning on the machine, remove the shipping tape and the cardboard shock-absorbing material. Note • The carriage and mat move to their initial positions. -
Page 8: Designncut Manager Windows
DesignNCut Manager WINDOWS This section describes the windows of the dedicated 1. No. Displays the machine number of the connected control application used to cut out or draw patterns. machine. ■ Main Window 2. Search Searches for connected machines. Computer With the mobile device version, tap [No.] (1) to search for a machine. - Page 9 ■ Preview Window 1. Load data Imports cutting/drawing patterns from Computer ScanNCutCanvas or a computer. 2. Operation Select [Cut] or [Draw] from the drop-down list. Other settings may appear in the drop-down list if a separately sold accessory kit is detected. With the mobile device version, tap [Operation] to display a screen for selecting [Cut] or [Draw].
-
Page 10: Settings Screens
SETTINGS SCREENS ■ 2. Machine Info Settings for various functions can be selected or changed. 1. No. Displays the machine number for this machine. 2. Ver. Machine Settings Displays the version of this machine’s software. 3. Name Press in the operation panel to display Displays the name that was specified for the machine the settings screen. -
Page 11: Designncut Manager Settings
[OK] to apply the settings. menu. 1. Support Page Displays the website for the Brother Solutions Center. 2. Connect DesignNCut Displays the connection procedures. 3. Guidance Displays the setup procedures, from specifying... - Page 12 f Select from 1/4, 2/4, 3/4 or all of the cutting area to be used for blade adjustment. Before cutting out a pattern, this machine performs an automatic blade adjustment, which adjusts the direction of the blade outside of the adhesive area of the mat.
-
Page 13: Connecting The Machine And Computer
CONNECTING THE MACHINE AND COMPUTER Selecting the Connection Method Wireless Connection Select the connection method to the wireless ■ Step 1 network. Open DesignNCut Manager (DesignNCut • Using Wireless Network Name (SSID) & Network Password (Key)..13 application for operation options), installed on the •... - Page 14 ■ Using Wireless Network Name Select [Use Wireless Network Name (SSID) & Network Password (Key)], and then click (SSID) & Network Password (Key) [Next]. Select your Wireless Network Name (SSID) and input the Network Password (Key) of your wireless LAN * Mobile version will automatically go to the next access point/router on your DesignNCut machine.
- Page 15 Enter your network password (key) using the Select the machine number and then click [OK]. pressing after each * For mobile version, tap [Done]. character. The characters on the DesignNCut LCD are listed in the order below. Note When pressing •...
- Page 16 ■ Using Router's WPS button Press your router's WPS button. Use this connection method if your wireless LAN access Make sure your DesignNCut machine and PC point/router has a WPS button. connection are on the same network. Memo • For details on the WPS button, check your wireless LAN manual for your wireless LAN access point/router.
- Page 17 The message, [Turn the machine off, then on Note again.] will appear on your LCD. Follow the machine's instruction. • To check your machine's number, press Once your machine is back on, the text [Standby to display the [2. Machine Info] on the (WLAN)] should display on your LCD.
- Page 18 When [DesignNCut connection is successful.] The message, [Turn the machine off, then on appears in the dialog box, click [OK]. again.] will appear on your LCD. Follow the machine's instruction. After completing the network connection, see “REGISTER DesignNCut ON ScanNCutCanvas” Once your machine is back on, the text [Standby on page 22 to connect your machine to (WLAN)] should display on your LCD.
-
Page 19: Direct Pc Connection Using Usb Cable (Windows Only)
Direct PC Connection Using USB : Operation performed on the machine Cable (Windows Only) When the message [Connected to WLAN. Press [OK] button.] appears on your LCD, press With a USB cable, directly connect the machine and button on your machine. the computer with DesignNCut Manager (DesignNCut application for operation options). - Page 20 Go back to DesignNCut Manager and click [Connect]. When [DesignNCut connection is successful.] appears in the dialog box, click [OK]. Click [ScanNCutCanvas] to access to http://ScanNCutCanvas.Brother.com to register a new account. After registering, click [Next]. All settings have been completed.
-
Page 21: Resetting The Wireless Connection Setup
Resetting the Wireless Connection Checking the Wireless LAN Settings/ Setup Connection Status When a connection to the wireless network cannot From the [DesignNCut] menu, click [Network be established. reset for DesignNCut]. Click [DesignNCut], then [Settings], and then Memo select [Network]. •... -
Page 22: Setting Up Manually
Setting Up Manually Click [DesignNCut] in the main window of DesignNCut Manager, click [Settings], and then select [Network]. Memo • With the mobile device version: →[Settings]→[Network] b Use when proxy settings are required. c Displays the MAC address. After specifying the settings, click [OK]. a If [Static] is selected, TCP/IP settings can be manually entered. -
Page 23: Register Designncut On Scanncutcanvas
Manager • First-time users must create a Click [ScanNCutCanvas] to access to ScanNCutCanvas account. • If an error occurs while sending or receiving http://ScanNCutCanvas.Brother.com to register data, see “ERROR MESSAGES” on page 59. a new account. Memo Note • If you registered a new ScanNCutCanvas •... - Page 24 ■ Changing to a Different ■ Deleting a Registered ScanNCutCanvas Login ID ScanNCutCanvas Login ID Click [ScanNCutCanvas] in the main window of Click [ScanNCutCanvas] in the main window of DesignNCut Manager, and then click [Change DesignNCut Manager, and then click Account].
-
Page 25: First Steps
FIRST STEPS The following procedures describe basic operations, from preparing the materials to cutting. Mat and Material Combinations The recommended material thickness is 0.1 mm to 0.3 mm for paper and 0.2 mm to 1.5 mm for fabric. Refer to the following table for the appropriate mat and sheet for fabric cutting according to the material to be used for cutting or drawing. - Page 26 Sheet for fabric cutting Use one of the following two sheets for fabric cutting when cutting fabric. Standard mat High adhesive strength mat; use with Iron-on fabric • Reinforces the fabric so that various patterns can be cut out. cutting fabric. appliqué...
-
Page 27: Attaching The Material To The Mat
If any problems occur when testing attaching, use Attaching the material to the mat different material. After preparing the mat and sheet (when cutting fabric) appropriate for the material, attach the material to the mat. For the mat and sheet appropriate for the material, see “Mat and Material Combinations”... - Page 28 ■ Fabric (Other Than for Quilt Piecing) Firmly attach all of the material to the mat so that there are no wrinkles and no part can curl off. • Otherwise, curls in the material may become caught when the mat is inserted. a Standard mat b Iron-on fabric appliqué...
- Page 29 Cut the iron-on fabric appliqué contact sheet to Peel off the backing from the contact sheet. a size 2 cm (3/4") or more larger than the Before peeling off the backing, allow all parts to cool. outline of the pattern to be cut. a Contact sheet b Backing With the side of the fabric that the contact...
- Page 30 Peeling Off the Material (Excluding Quilt Note Piecing) After cutting the material, use a spatula to peel off • Do not wash fabrics attached with a double- the fabric together with the attached contact sided adhesive contact sheet. sheet. •...
- Page 31 Test attaching the material. Note Before attaching the material to the mat, use a corner of the adhesive side of the mat to test attaching it. If • Do not discard the protective sheet peeled off any problems occur when testing attaching, use the mat;...
- Page 32 Firmly move the spatula handle across the Note surface of the fabric to remove any wrinkles and firmly attach the fabric to the mat. • The support sheet may be unintentionally peeled off while you are removing the fabric from the mat under the following conditions: - The adhesive between the mat and the support sheet is becoming weak after repeated uses.
-
Page 33: Adjusting The Blade Extension
Adjusting the Blade Extension The appropriate blade extension differs depending on the material type and thickness. Before installing the holder in the carriage, turn the holder cap to adjust the blade extension, and then perform trial cutting. For details on trial cutting, see “Trial Cutting” on page 37. ■... - Page 34 With the reference line on the holder facing Appropriate Blade Extension toward you, fully turn the cap to the right to Adjust the blade extension to slightly exceed the thickness of the material that will be cut. Use the extend the blade tip to its maximum. markings on the holder to make the adjustment.
-
Page 35: Installing And Uninstalling The Holder
Push down on the holder lock lever. Installing and Uninstalling the Holder Firmly push down until the holder is locked in place. After adjusting the blade extension, install the holder in the machine. For the blade extension appropriate for the material, see “Adjusting the Blade Extension” on page 32. -
Page 36: Basic Operations
Chapter 2 BASIC OPERATIONS PATTERN CUTTING ■ Loading the Mat The following procedures use patterns to describe the entire series of operations, from selecting a Attach the material that will be cut to the mat. pattern and editing it to cutting. •... - Page 37 ■ Sending Patterns to the Machine Click [Load data] in the main window of DesignNCut Manager, and then click [Load Start up DesignNCut Manager. from ScanNCutCanvas] to import the pattern. Memo • With the mobile device version, tap [Load data] Log in to ScanNCutCanvas, and edit the in the main screen.
- Page 38 ■ Trial Cutting Example: Settings when positioned in the lower-left corner of the mat Adjust the blade extension according to the material, Vertical: 11-12 and then use the same material to be used in your Horizontal: 0-1 project to perform trial cutting. Memo •...
- Page 39 ■ Unloading the Mat Note Press on the operation panel to feed out • Depending on the material being used, it may not be cut cleanly if the cutting pressure is not the mat. correctly adjusted. For details on the appropriate cutting pressure, see “Cutting Settings”...
- Page 40 Adjusting the Cutting Speed/Pressure ■ Checking the Trial Cutting Results Click [Settings] in the DesignNCut Manager Adjust the blade extension according to the trial ● window that appears when cutting to display a cutting results. window where settings can be adjusted. Repeatedly perform trial cutting and adjust the ●...
- Page 41 • To stop cutting, click [Stop]. If it is clicked again, the blade and the mat will return to their original positions. • When cutting is finished, press to feed out the mat.
-
Page 42: Advanced Operations
Chapter 3 ADVANCED OPERATIONS DRAWING FUNCTIONS With a pen and pen holder, you can draw patterns Remove the cap from the pen, and then insert on material. Using the seam allowance settings also the pen into the pen holder with the point allows you to draw patterns with seam allowances down. - Page 43 Load the mat with the material for drawing The pattern appears in the drawing/cutting settings window of DesignNCut Manager. (cutting) attached. • For details on attaching material to the mat, see Select [Draw] from the [Operation] drop-down “Mat and Material Combinations” on page 24. list.
-
Page 44: Using Drawing Functions To Fill Patterns/Make Outlines Thicker
Memo Using Drawing Functions to Fill • With the mobile device version: Preview Patterns/Make Outlines Thicker Window →[Settings] → [FILL / ADDITIONAL →[Settings] → LINE] or Main window→ [Operation] Note • Depending on the material and pen being used, After selecting a design under [Fill Pattern], material drawn with a filled pattern may be difficult to peel off or may tear. - Page 45 ■ Making Pattern Outlines Thicker Note Additional lines can be drawn to make pattern outlines appear thicker. • Refer to the following examples when specifying settings for “Additional Line” and See steps through in “Filling Patterns” on “Additional Line Spacing”. page 43 to specify the drawing settings.
-
Page 46: Cutting Around Drawings
Cutting Around Drawings In ScanNCutCanvas, select the pattern to be In this example, we will specify a seam allowance drawn, and then specify the seam allowance. for a pattern and draw the pattern, then cut an outline around it. • For details on editing patterns, click ScanNCutCanvas, and then refer to “Creating ■... - Page 47 ■ Drawing ■ Cutting Select [Draw] from the [Operation] drop-down Select [Cut] from the [Operation] drop-down list. list. Memo Memo • With the mobile device version: • With the mobile device version: Preview window→[Operation]→[Draw] Preview window→[Operation]→[Cut] Adjust the drawing pressure. Click [Apply].
- Page 48 Remove the pen holder, and then install the blade holder. Note • After use, remove the pen from the pen holder, and then attach the cap to the pen before storing it. CAUTION • Before installing the blade holder in the machine, remove the protective cap.
-
Page 49: Capturemat Function
CaptureMat FUNCTION ■ Photographing Material and A printed image (paper or sticker), as stamped page or an original hand-drawn illustration can be Importing the Data captured and its outline can be cut out or drawn. This is useful for capturing images for paper crafts, ... - Page 50 Place the included calibration sheet on a flat Click [Select], and then select the image saved surface, and then photograph it from directly in step above. The name of the imported image appears in the box. Save the photo to the computer. Memo Note •...
- Page 51 Importing an Image of Material Attach the material to be photographed to the mat. Select the name of the registered camera from Memo the [Camera] drop-down list. • The 12" × 24" (305 mm × 610 mm) mat cannot Click [Select] beside [Mat Image].
-
Page 52: Appendix
Chapter 4 APPENDIX CONSUMABLES Replacement Criteria Replacing the Blade For the safe operation of this machine, replace the ■ Removing following consumables according to the replacement criteria. To purchase parts, contact the retailer who Twist off the holder cap to remove it. sold you this machine or the nearest authorized service center. - Page 53 Pull up the holder to leave the blade in the Twist on the holder cap to attach it to the rubber area. holder. Fully tighten the cap until the blade extension reaches its maximum, and then loosen the cap until the blade is no longer visible.
-
Page 54: Care And Maintenance
CARE AND MAINTENANCE Cleaning Note • Do not use alcohol or water to clean the mat. • When the mat is not being used, clean it, and ■ Cleaning the Mat then store it with the protective sheet affixed. If the protective sheet is not affixed, the mat’s Cuttings and cut edges of patterns attached to the mat adhesive strength will decrease. - Page 55 Using a commercially available brush, clean off Remove the holder from the carriage. cuttings, lint, and dust. Specifically clean off lint and dust around the blade. If lint and dust accumulate between the blade and holder, the blade may no longer rotate or the cutting quality may become poor.
-
Page 56: Adjusting The Mark Sensors
Press to select the horizontal Adjusting the Mark Sensors adjustment value, and then press The following message appears. If the cutting position is misaligned when cutting using the “CaptureMat” function, the machine can be manually adjusted. Horizontal 0 Example: If the horizontal adjustment value was If the cutting position is shifted upward or ●... -
Page 57: Troubleshooting
If the machine stops operating correctly, check the following possible problems before requesting service. You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at “ http://s.brother/cpqaa/ ”. - Page 58 Symptom Possible Causes (or Results) Solutions Reference The material extends from the Attach the material while keeping it page 26 The material to be cut/ adhesive area of the mat. within the adhesive area of the mat. drawn cannot be The mat’s adhesive strength has attached to the mat.
- Page 59 Symptom Possible Causes (or Results) Solutions Reference A blade appropriate for the material Use a blade appropriate for the material page 32 being cut is not used. being cut. The blade extension from the blade Remove the holder from the carriage, page 33 holder is too little.
-
Page 60: Error Messages
ERROR MESSAGES The following table lists some of the messages that may appear while the machine is operating as well as their corresponding solutions. Perform the necessary operation according to the instructions in the message or the solution described here. If the problem persists, contact the retailer who sold you this machine or the nearest authorized service center. - Page 61 When Setting Up the Wireless Network Error Messages (Cutting Machine) Cause/Solution The wireless network setting is not activated. Connection failed (Err-01). Press [OK] button. Activate the wireless network. The wireless access point/router cannot be detected. 1. Check the following 4 points. - Make sure that the wireless access point/ router is powered on.
-
Page 62: Designncut Manager Error
Error Messages (Cutting Machine) Cause/Solution As shown below, the cause and solution differ depending on when this message appeared. - Appeared after running [2.Setup Wizard] to search for an SSID Possible Cause: Failed to detect an SSID Solution: Check the information described for 1. of (Err-02). Cannot find SSID. - Page 63 Error Code (Cutting Error Messages (DesignNCut Manager) Causes / Solutions Machine) Try the following. - Ungroup the pattern. - Change the fill settings. This data is too intricate to be converted to E221 - Reduce the number of fill patterns. a filling pattern.
- Page 64 Error Code (Cutting Error Messages (DesignNCut Manager) Causes / Solutions Machine) Check the following. - Check that your wireless access point/router is turned on. E507 Not connected to a network. - Check that the network cable of your wireless access point/router is plugged in.
- Page 65 Error Code (Cutting Error Messages (DesignNCut Manager) Causes / Solutions Machine) Connecting to ScanNCutCanvas failed. Registration of your machine has been deleted from E519 Register the login ID for ScanNCutCanvas ScanNCutCanvas. Register the machine again. again. Select the same connection method as that selected on the Cannot connect to machine.
- Page 66 Error Code (Cutting Error Messages (DesignNCut Manager) Causes / Solutions Machine) The selected photo cannot be used. E552 Failed to load the captured image. Select an image photographed under the specified conditions. The camera may be set so that photographed images are not saved.
-
Page 67: Updating The Software
UPDATING THE SOFTWARE Update Procedure Using Computer The machine’s software can be updated using either If an upgrade file is posted on the Brother Solutions an Internet connection or a USB cable. For update Center (http://s.brother/cpqaa/), download the file, information, refer to details posted on the Brother and then update the machine according to the Solutions Center (http://s.brother/cpqaa/). -
Page 68: Optional Accessories
“DesignNCut” logo. The machine will not operate correctly if any other mat is used. This product is only compatible with line embossing. For the complete list and newest information on optional accessories, refer to the Brother Solutions Center (http://s.brother/cpqaa/). PRODUCT SPECIFICATIONS Items Specifications Approx. -
Page 69: Index
INDEX Required material condition (capturing) ...... 48 Adjusting the cut position (CaptureMat) ......55 Auto shut down .............9 ScanNCutCanvas ............3 Registering/Changing/Deleting ......22 Seam allowance ............45 Basic pattern cutting ...........35 Settings Blade extension ............32 DesignNCut Manager .......... 10 Machine ..............9 Software update ............ - Page 70 Please visit us at http://s.brother/cpqaa/ where you can get product support and answers to frequently asked questions (FAQs). This machine is approved for use in the country of purchase only. Local Brother companies or their dealers will only support machines purchased in their own countries.