Related Manuals for Samsung DVG50M7450P/A3-00
Summary of Contents for Samsung DVG50M7450P/A3-00
- Page 1 Dryer User manual DVE(G)50M7450* DV7450M-03170Z-02_EN.indd 1 3/31/2017 12:49:27 PM...
-
Page 2: Table Of Contents
Contents Safety information What you need to know about the safety instructions Important safety symbols Important safety precautions Warnings Cautions Installation requirements Key installation requirements Location considerations Ducting requirements Exhausting requirements Gas requirements Electrical requirements Installation What’s included Step-by-step installation Vent blockage test Exhaust ducting guide Switching the door position... - Page 3 Maintenance Cleaning Troubleshooting Checkpoints Information codes Specifications Fabric care chart Protecting the environment Specification sheet Cycle chart English 3 DV7450M-03170Z-02_EN.indd 3 3/31/2017 12:49:27 PM...
-
Page 4: Safety Information
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features. -
Page 5: Important Safety Precautions
WARNING - Gas Appliances: • State of California Proposition 65 Warnings (US only) This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. • Gas appliances can cause low-level exposure to Proposition 65 listed substances, including but not limited to, benzene, carbon monoxide, formaldehyde and soot, substances resulting from the incomplete combustion of natural gas or LP fuels. - Page 6 Safety information 5. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. 6. Before the appliance is removed from service or discarded, remove the door to the drying compartment.
- Page 7 WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode. Any material that has been in contact with a cleaning solvent or flammable liquids or solids should not be placed in the dryer until all traces of these flammable liquids or solids and their fumes have been removed.
-
Page 8: Warnings
Safety information Warnings WARNING • Ensure pockets are free from small, irregularly shaped hard objects, foreign material, etc. ie. coins, knives, pins, etc. These objects could damage your dryer. • Gas leaks may occur in your system, resulting in a dangerous situation. Cautions CAUTION •... - Page 9 • Do not place items in your dryer that have been spotted or soaked with vegetable oil or cooking oil. Even after being washed, these items may contain significant amounts of these oils. • Residual oil on clothing can ignite spontaneoulsy. The potential for spontaneous combustion increases when items containing vegetable oil or cooking oil are exposed to heat.
-
Page 10: Installation Requirements
Installation requirements Read through the following instructions before installing the dryer, and keep this manual for future reference. WARNING Control board and inlet valve are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel - Do not contact this part while appliance is energized. Key installation requirements •... -
Page 11: Ducting Requirements
Ducting requirements Recommended Use only for short-run installation Weather hood type 4” (10.2 cm) 2.5” (6.4 cm) No. of 90° Metallic Metallic Rigid Rigid elbows flexible* flexible* 80 ft. (24.4 m) 41 ft. (12.4 m) 74 ft. (22.6 m) 33 ft. (10.1 m) 68 ft. -
Page 12: Exhausting Requirements
Installation requirements Exhausting requirements Outside the United States and Canada The dryer must not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl • Refer to the local codes. space, or a concealed space of a building. WARNING Exhausting the dryer to the outside will •... -
Page 13: Gas Requirements
Gas requirements WARNING • Do not reuse old flexible metal gas lines. Flexible gas lines must be • Use only natural or LP (liquid propane) design certified by the American Gas gases. Association (CGA in Canada). • THE INSTALLATION MUST CONFORM WITH LOCAL CODES, OR IN THE NOTE ABSENCE OF LOCAL CODES, WITH... -
Page 14: Electrical Requirements
Installation requirements Electrical requirements Grounding The wiring diagram is located on the plate under the control panel or rear frame. This dryer must be grounded. In the event of malfunction or breakdown, the ground WARNING will reduce the risk of electrical shock by •... - Page 15 Electric models Electrical connections Before operating or testing, follow all WARNING grounding instructions in the “Grounding” • Your dryer has an optional cord with section. An individual branch (or separate) an equipment-grounding conductor circuit serving only your dryer is and a grounding plug. This cord is sold recommended.
- Page 16 Installation requirements Electric models – Canada Only WARNING • A 120 / 240 volt, 60 Hz AC approved Risk of Electric Shock electrical service fused through a When local codes allow, you can connect 30-ampere fuse or circuit breaker on the dryer’s electrical supply with a new both sides of the line is required.
-
Page 17: Installation
What’s included Make sure all the parts are included in the product package. If you have a problem with the dryer or the accessories, contact a local Samsung customer center or the retailer. Dryer at a glance 01 Control panel... - Page 18 Installation Accessories & tools Provided accessories Y connector Water hose Short water hose (Canadian elec. models only) Required tools Pliers Cutting knife Pipe wrench (gas Nut driver models only) Level Philips screwdriver Duct tape Wrench WARNING Packing materials can be dangerous to children. Keep all packing materials (plastic bags, polystyrene, etc.) out of children’s reach.
-
Page 19: Step-By-Step Installation
Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. STEP 1 Install the exhaust system 1. Select a location and move the dryer to the site. For easy access, we recommend you install the dryer in the same location as your washer. - Page 20 Installation STEP 3 Connect the electrical wiring First, read through the “Electrical requirements” section, and follow these steps. 3-wire system 1. Loosen or remove the center terminal block. 2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block.
- Page 21 4-wire system 1. Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION • To connect the ground wire to the neutral position without through contact A (cabinet ground), contact a technician.
- Page 22 Installation STEP 4 Connect the water hose The dryer must be connected to a cold water tap using the provided water hoses. 1. Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose.
- Page 23 Using the short hose as an extension 1. Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose. Then, connect the short hose (B) to the cold water tap. Turn the coupling manually until it is tight.
- Page 24 Installation STEP 5 Level the dryer To ensure optimal performance, the dryer must be level. 1. Using a level (A), check if the dryer is level side to side and then front to back. If the dryer is not level, adjust the leveling feet (B) at the bottom of the dryer.
-
Page 25: Vent Blockage Test
STEP 6 Power on (Gas models) Make sure all gas connections, the exhaust line, and all wiring is connected correctly. Then, plug the power cord into a power source and check the dryer’s installation and operation using the final checklist in Step 7 below. STEP 7 Final check When installation is complete, confirm that: •... - Page 26 Installation 2. Press the POWER button to turn the dryer on, then simultaneously press and hold the Adjust Time and Dry Level buttons for 3 seconds. “InS or In” appears in the dryer’s display. (If you have started other procedures before the Vent Blockage Test, the dryer will not enter the Vent Blockage Test mode.) 3.
-
Page 27: Exhaust Ducting Guide
Exhaust ducting guide Ducting 1. Make sure the dryer is installed properly so the air exhausts freely. 2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use lint-trapping screws. 3. To facilitate the exhaust, keep the ducts as straight as possible. Cleaning Clean all old ducts before installing the dryer, and make sure the vent flap opens and closes freely. - Page 28 Installation 3. Remove the two screws from the lever holder, and then remove the holder cover. 4. Put the lever holder on the other side as shown, and then tighten the screws. Install the holder cover on the opposite side as shown. 5.
- Page 29 7. Remove the glass holder, and switch the positions of: a. the hinge cover and the door handle. b. the hinge holder and the glass-guide holder 8. Remove the door lever, and then move it to the other side as shown. 9.
-
Page 30: Before You Start
Before you start Here are a few things you should know before starting your dryer. Sort and load • Put one wash load in the dryer at a • Overloading reduces the tumbling time. performance, resulting in uneven • Do not mix heavy and lightweight items drying and wrinkling. -
Page 31: Operations
Operations WARNING To reduce the risk of fire, electric shock, or injury to persons, read the “Safety information“ before operating this appliance. Feature panel Turn the cycle selector to select a desired cycle. When a cycle is 01 Cycle Selector selected, the cycle indicator lights up. -
Page 32: Simple Steps To Start
Operations 05 Digital Graphic Displays all cycle information, including the cycle time, Display information code, and operating status. This function is available with NORMAL and TIME DRY. With the Eco Dry activated, drying takes a longer time but the power consumption is reduced. 06 Eco Dry The drying time can be extended by up to 3 times depending on the temperature and load. -
Page 33: Cycle Overview
Cycle overview Sensor Dry Sensor Dry cycles sense moisture in the load and stop the dryer when the load reaches the dryness level you have selected with Dry Level. Cycle Description For most fabrics including cottons and linens. NORMAL If NORMAL is selected, the Eco Dry function is enabled by default. For more information, see Eco Dry in the “Feature panel“... -
Page 34: Cycle Guide
Operations Steam Cycles Use steam to reduce wrinkling and odors on items. Cycle Description Use to smooth out wrinkles and reduce odors in loads of one to four items. With this cycle selected, a small amount of water is REFRESH sprayed into the dryer drum after several minutes of tumbling with heat. -
Page 35: Special Features
Cycle Description Down–filled Items Use NORMAL and the Medium temperature setting. (jackets, sleeping • Add a couple of dry towels to absorb moisture and shorten bags, comforters, drying time. etc.) Do not dry on a heat setting. Foam Rubber (rug backs, stuffed toys, WARNING shoulder pads, etc.) - Page 36 To use Smart Care, you must have the • After you use this function, the dryer Samsung Smart Care app installed on your will delete delete the record of the smartphone. information code from its code log.
- Page 37 Maintenance Keep the dryer clean to prevent decreased performance and to lengthen its life cycle. WARNING The control board and inlet valve are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel - Do not contact this part while the dryer is energized. Cleaning Feature panel •...
- Page 38 Troubleshooting Checkpoints If the dryer operates abnormally, first check the list of problems in the table below and try the suggested actions. Problem Action • Make sure the door is latched shut. • Make sure the power cord is plugged into a live electrical outlet.
- Page 39 Problem Action • Check the load for objects such as coins, loose buttons, nails, etc. Remove promptly. • It is normal to hear the dryer gas valve or heating element cycle on and off during the drying cycle. Is noisy. •...
- Page 40 Extended time. reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. English DV7450M-03170Z-02_EN.indd 40 3/31/2017 12:49:38 PM...
- Page 41 • If this information code remains, contact a Samsung service center. Incorrect door switch. • Contact a Samsung service center. If any information code keeps appearing on the screen, contact a Samsung service center. English 41 DV7450M-03170Z-02_EN.indd 41 3/31/2017 12:49:38 PM...
- Page 42 Specifications Fabric care chart Bleach The following symbols provide garment care direction. The clothing care labels Any bleach (when needed) include symbols for drying, bleaching, drying and ironing, or dry cleaning when Only non-chlorine (color-safe) necessary. The use of symbols ensures bleach (when needed) consistency among garment manufacturers Tumble dry...
- Page 43 Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Drip dry Warning symbols for laundering Dry flat Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Do not iron Protecting the environment This appliance is manufactured from...
- Page 44 Specifications Specification sheet NOTE “A. Height” Spec can vary from 46 to 46.5 inches (116.8-118.0 cm) depending on the leveling feet adjustment. Type Front loading dryer Model name DVE(G)50M7450* Product - inches (cm) 45.0 (114.4) A. Height Required for Installation - inches 48.0 Product - inches (cm) 27.0 (68.6)
- Page 45 Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about full. Do not add items over this level as they need to tumble freely. • Medium load : Fill the drum to about full.
- Page 46 Specifications NOTE • : factory setting, : can be selected Temperature setting Time Cycle setting High Medium Extra Low NORMAL HEAVY DUTY BEDDING Sensor Dry PERM PRESS DELICATES TOWELS TIME DRY ...
- Page 47 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 48 God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book;...
- Page 49 Ridgefield Park, NJ 07660 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English 49 DV7450M-03170Z-02_EN.indd 49 3/31/2017 12:49:44 PM...
- Page 50 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 51 God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book;...
- Page 52 (French) FAX : 1-866-436-4617 Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English DV7450M-03170Z-02_EN.indd 52 3/31/2017 12:49:44 PM...
- Page 53 Memo DV7450M-03170Z-02_EN.indd 53 3/31/2017 12:49:44 PM...
- Page 54 Memo DV7450M-03170Z-02_EN.indd 54 3/31/2017 12:49:44 PM...
- Page 55 Memo DV7450M-03170Z-02_EN.indd 55 3/31/2017 12:49:44 PM...
- Page 56 Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT 1-800-SAMSUNG (726-7864) www.samsung.com/us/support U.S.A 1-844-SAM-PAYS (726-7297) 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) CANADA 1-844-SAM-PAYS (726-7297) www.samsung.com/ca_fr/support (French) DC68-03170Z-02 DV7450M-03170Z-02_EN.indd 56 3/31/2017 12:49:44 PM...