Makita BTD104 Instruction Manual
Hide thumbs
Also See for BTD104:
- Instruction manual (65 pages) ,
- Instruction manual (37 pages) ,
- Instruction manual (33 pages)
Related Manuals for Makita BTD104
Summary of Contents for Makita BTD104
- Page 1 INSTRUCTION MANUAL Cordless Impact Driver BTD044 BTD064 BTD104 013662 IMPORTANT: Read Before Using.
-
Page 2: Specifications
Sound power level (L ) : 102 dB(A) Be sure that you understand their meaning before use. Uncertainty (K) : 3 dB(A) ･ Read instruction manual. Model BTD104 ･ Only for EU countries Ni-MH Sound pressure level (L ) : 93 dB(A) -
Page 3: General Power Tool Safety Warnings
Do not use any Cordless Impact Driver adapter plugs with earthed (grounded) power Model No./ Type: BTD044, BTD064, BTD104 tools. Unmodified plugs and matching outlets will are of series production and reduce risk of electric shock. - Page 4 under the influence of drugs, alcohol or power tool’s operation. If damaged, have the medication. A moment of inattention while power tool repaired before use. Many accidents operating power tools may result in serious are caused by poorly maintained power tools. personal injury.
- Page 5 Hold the tool firmly. Tips for maintaining maximum battery life Wear ear protectors. Charge battery cartridge before completely discharged. SAVE THESE INSTRUCTIONS. Always stop tool operation and charge the battery cartridge when you notice less tool WARNING: power. DO NOT let comfort or familiarity with product Never recharge a fully charged battery...
-
Page 6: Functional Description
If you can see the red indicator on the battery capacity at this time. For BL1430A only, use upper side of the button, it is not locked completely. Makita refreshing adapter to refresh the battery. Auto-stop mechanism CAUTION: Always install the battery cartridge fully until the •... - Page 7 Overloaded: This tool has a reversing switch to change the direction • The tool is operated in a manner that causes of rotation. Depress the reversing switch lever from the it to draw an abnormally high current. A side for clockwise rotation or from the B side for In this situation, release the switch trigger on counterclockwise rotation.
- Page 8 Press the button and choose the desired number. The red color light will light on if the trigger is • The displayed number changes fast by keeping released before the presetting number of impacts pressing the button. To set the first digit, pull the is achieved.
-
Page 9: Operation
1. Sleeve Standard bolt BTD044 2. Bit (M8) 013580 To install the bit, pull the sleeve in the direction of the arrow and insert the bit into the sleeve as far (M6) as it will go. Then release the sleeve to secure the bit. - Page 10 Fastening time Seconds (25) (13) (25) (13) Number of impacts Number of impacts (Presetting number) (Presetting number) 013720 013722 High tensile bolt BTD064 High tensile bolt BTD104 (M10) (M8) (M10) (M6) (M8) Seconds Fastening time Fastening time Seconds (25) (50) (25)
-
Page 11: Maintenance
If the tool is operated continuously until the battery • 1. Rear cover cartridge has discharged, allow the tool to rest for 2. Screws 15 minutes before proceeding with a fresh battery. The fastening torque is affected by a wide variety of factors including the following. -
Page 12: Optional Accessories
CAUTION: These accessories or attachments are recommended • for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 16 Makita Corporation Anjo, Aichi, Japan www.makita.com 885202-223...