Table of Contents
Advertisement
Ratio
1
To view the oSD menu, press the Joystick button on the
bottom of the monitor and then enter the Menu.
2
Go to Easy control > Ratio by moving the joystick.
3
Configure the options following the instructions that appear
in the bottom right corner.
4
If you want to configure an upper menu, or another option,
move the joystick to ◄ or press it (
5
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Each option is described below.
Menu > Easy control > Ratio
Wide
original
1:1
NoTE
The display may look the same for Wide, Original, and 1:1 options at the recommended resolution
y
(1920 x 1080).
Ratio is disabled with an interlaced signal.
y
/ OK).
Displays the video in wide screen, regardless of the video signal input.
Displays the video according to the aspect ratio of the video signal input.
The aspect ratio is not adjusted from the original.
NoTE
This function is not available when the DAS mode is turned on. To use the 1:1
y
mode, you should turn the DAS mode off.
USER SETTINGS
Easy control
brightness
Easy control
contrast
Volume
function
Input
Ratio
Screen
Settings
auto
configuration
Reset
▲ / ▼ : Move
Description
23
>
60
>
70
>
30
>
DVI-D
>
Wide
◄ : Back
/ ► : OK
Advertisement
Table of Contents
