Image Stabilizer - Canon EF 70-200mm Instructions Manual

7. Image Stabilizer

You can use the image stabilizer in AF or MF mode.
1
Set the STABILIZER switch
to ON.
If you are not going to use the
● ●
image stabilizer function, set
the switch to OFF.
2
Select the stabilizer mode.
MODE 1: Corrects vibrations in
● ●
all directions. It is mainly effective
for shooting still subjects.
MODE 2: Corrects vertical
● ●
camera shake during
following shots in a horizontal
direction, and corrects
horizontal camera shake
during following shots in a
vertical direction.
MODE 3: Corrects vibration
● ●
only during exposure. During
panning shots, corrects vibration
during exposure only in one
direction the same as MODE 2.
3
First press the shutter
button down halfway, then
press down all the way to
take the picture.
MODE 1, 2: Press the
● ●
shutter button down halfway
to stabilize the image in
the viewfinder and enable
stabilization.
MODE 3: Press the shutter
● ●
down halfway to initiate
computation of stabilization,
then press down all the way
to enable stabilization.
ENG-10