Update Now; Auto Update - Samsung UBD-M9000/XU Full Manual

Update Now

1. Select Support > Software Update >
Update Now.
2. An online update function downloads and
installs the update software directly from the
Internet.
- This option requires an Internet connection.
| NOTES |
\ When the system update is done, check the
software details in the Product Information
section of the Contact Samsung screen.
\ Do not turn off the product during the Software
Update.
It may cause the product to malfunction.

Auto update

You can set the Auto update function so that the
product downloads new upgrade software when it
is in Auto update mode.
This allows the product to download upgrade
software automatically, when you are not using it.
1. Press the Up/Down
update, and then press the
2. The function turns on or off each time the
(OK) button is pressed.
| NOTE |
\ To use the Auto update function, your product
must be connected to the Internet.
buttons to select Auto
(OK) button.
27
Update by USB
To upgrade by USB, follow these steps:
1. Visit Samsung's website on a computer and
download the update package to a USB
device.
2. Save the update package in the USB device's
top-level folder.
- Otherwise, the product will not be able to
locate the update package.
3. Connect the USB device with the update
package to the product.
4. Select Support > Software Update >
Update Now.
5. The software is updated using the update
package on the USB device.
| NOTES |
\ There should be no disc in the product when
you upgrade the software using the USB jack.
\ When the system upgrade is done, check the
software details in the Product Information
section of the Contact Samsung screen.
\ Do not turn off the product during the Software
Update.
It may cause the product to malfunction.
\ Software Updates using the USB jack must be
performed with a USB flash memory stick only.
English