Samsung Multifunction ProXpress C267 Series User Manual page 214

Fax
Item
Specifies the number of times the machine rings before
Ring To Answer
answering an incoming call.
Selects the default fax receiving mode (see "Changing
Receive Mode
the receive modes" on page 273).
This option allows users to select sending/receiving fax
Manual TX/RX manually using the On Hook Dial (
extension telephone, or a handset.
Redial Term Sets the time interval before automatic redialing.
Sets the number of redial attempts. If you enter 0, the
Redial Times
machine will not redial.
Sets the machine to print a report whether a fax
transmission was successfully completed or not.
Fax Confirmation
Prints a transmission report with a minimized image of
Image TCR
the first page of the fax sent.
Automatically reduces an incoming fax page to fit the
Auto Reduction
size of the paper loaded in the machine.
Description
) button,
If you select On-Error, the machine prints a
report only when a transmission is not
successful.
Item
Discards a specific length from the end of the received
Discard Size
fax.
Initiates fax reception from an extension phone
plugged into the EXT socket on the back of the
Receive Start Code machine. If you pick up the extension phone and hear
fax tones, enter the code. It is preset to *9* at the
factory.
Enables a user to use a single telephone line to answer
several different telephone numbers. You can set the
machine to recognize different ring patterns for each
DRPD Mode
number. This setting may not be available depending
on your country (see "Receiving faxes using DRPD
mode" on page 274).
Allows you to check the current tray settings and
change the settings if necessary.
Paper Source
Description
Auto: You can set the machine to automatically
to the tray with the same sized paper when the
tray in use is empty.
3. Useful Setting Menus
214