Installed Washer Dimensions - Frigidaire FAFW3574K Installation Instructions Manual

INSTALLED WASHER DIMENSIONS

50.8" (129cm)
to clear open door
freestand washer
on floor
floor line
washer mounted on
optional pedestal
floor line
* To obtain these minimal depth dimensions, dryer must be vented straight back. Using a quick-turn 90° elbow (right or down on freestanding dryer) adds approximately 0.75 in. (2.0 cm)
to installation depth. Upward venting of exhaust on pedestal-mounted or freestanding dryer adds approximately 4 in. (10.2 cm) to installation depth. Leftward venting on
pedestal-mounted or freestanding dryer adds approximately 3.75 in. (9.5 cm) to installation depth. Downward venting of exhaust on pedestal-mounted dryer adds approximately
2.25 in. (5.7 cm) to installation depth.
Hot and cold inlet hose length approximately 43 inches (109cm)
1
Power supply cord length approximately 60 inches (152.5cm).
2
Drain hose length approximately 52 inches (132cm).
3
50.8" (129cm)
to clear open door
* To obtain these minimal depth dimensions, dryer must be vented straight back. Using a quick-turn 90° elbow (right) adds approximately 0.75 in. (2 cm) to installation depth.
Upward venting of exhaust on stacked dryer adds approximately 4 in. (10.2 cm) to installation depth. Downward venting of exhaust on stacked dryer adds approximately
2.25 in. (6.5 cm) to installation depth. Leftward venting of exhaust on stacked dryer adds approximately 3.75 in. (9.5 cm) to installation depth.
1 Hot and cold inlet hose length approximately 43 inches (109cm)
Power supply cord length approximately 60 inches (152.5cm).
2
Drain hose length approximately 52 inches (132cm).
3
6
29.75" (75.5cm)*
to front of closed door
29.75" (75.5cm)*
to front of closed door
71.5"
(182cm)
water supply
connection
on rear of unit
1
power cord
on rear of unit
water supply
connection
on rear of unit
1
gas supply
pipe on rear
of gas unit
37"
(94cm)
power cord
on rear of unit
27.0"
(68.5cm)
drain hose
on rear
of unit
3
2
36.0"
(91.5cm)
27.0"
(68.5cm)
electrical
supply on
rear of unit
centerline
height for
rear vent
drain hose
on rear
of unit
3
2
39"
(99cm)
51.25"
(130cm)