Telecommunication Function; Activating Calls - Honeywell EDA70-3 User Manual

Telecommunication Function

The phone function of the terminal is realized with a speaker and a microphone. The phone
function also supports a Bluetooth headset or hands-free device. The EDA70 will use
loudspeaker mode without connecting bluetooth headsets or other external audio devices.
The phone function is enabled by default.
This terminal supports the following network types:
• GSM&EDGE：Band2/Band3/Band5/Band8
• WCDMA：Band1/Band2/Band4/Band5/Band8
• FDD-LTE：Band1/Band2/Band3/Band4/Band7/Band20
When users enable the phone function and activate the service through wireless carriers,
they can customize the phone features and network settings in the Mobile Network
interface in Settings.
Note: EDA70-3 WWAN version supports automatic system time setting with network
messages and timezone messages (NITZ).

Activating calls

Calls can be activated by inserting Micro SIM card in the terminal. Micro SIM card can be
purchased from the network service provider.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Move the battery cover safety lock to the lock position at left.
11. Turn on the terminal.
User Guide for ScanPal Series Terminal
Turn off the terminal.
Press down the battery cover safety button to move the lock to the unlock position at
right;
Unlock the battery cover using its lock handle;
Remove the battery (remove it from its bottom end before pulling it out);
Open the cover of SIM card slot.
Insert the SIM card from the SIM card slot until hearing a click.
Press down the cover of SIM card.
Insert the battery (Insert the connector side first, then press the battery down to
establish connection between the battery and the phone).
Press down the battery cover (Insert the connector side first, then press down the
battery cover).
Chapter 4: Using Telecommunication Function
47