Removing The Dummy Blade From The Chassis - Fujitsu PRIMEHPC FX1000 Operating Manual

Chapter 3 Starting Up
3.11 Installing/Removing the Dummy Blade
Note
- When inserting the dummy blade, be careful not to allow foreign objects, such as cables, to enter the
chassis.
3.11.2

Removing the Dummy Blade From the Chassis

This section describes how to remove the dummy blade from the chassis.
1. Unlock the lock, grasp the knob, and pull out the dummy blade (1).
Figure 3.23 Installing the Dummy Blade
Knob
Figure 3.24 Removing the Dummy Blade
Knob
44
Lock
(1)
(1) (1)
Lock
(1)
(1) (1)
C120-0089-03EN