Alarm - Philips Xenium CTX703GRY/00 Manual

The ringtone of your incoming calls is changed
to the recording. To change the ringtone, see
"Alert sounds" on page 77. To use the ringtone
for contacts, see "Adding or editing contacts" on
page 34 or see "Group your contacts on the
Smart Phonebook" on page 36.

Alarm

You can set up to five alarms.
To set an alarm
1. Check that your clock is correctly set (see
"Set clock" on page 14).
2. Go to Tools > Alarm.
The screen of alarm list appears.
3. Select an alarm, and tap on
alarm setting screen.
Time: Set the alarm time.
Repeat: Repeat the alarm on one or some of
the weekdays or weekends. Tap to select
your option. Tap on
Alarm tone: Tap to select an alarm tone.
Snooze(Mins): Select an alarm interval: 5, 10,
42
Edit to enter the
Done to finish setting.
or 20 minutes.
Alert type: Select how the alarm sounds at
the set time.
4. Tap on Done when you finish setting the
alarm.
5. To turn off an alarm, tap on an alarm, and
then Off.
To use an alarm
At the set alarm time, your alarm rings or
vibrates, depending on the alert type you have
selected (see "To set an alarm").
Select Stop: The alarm stops. If you have selected
repeat mode for the alarm (see "To set an
alarm"), it will sound again at the set time.
Select Snooze: The alarm will sound again after
the set Snooze(Mins)
To mute the sounding alarm, you can also
turn over the phone (front side to the back, back
side to the front, see "Sensor" on page 6).
interval.
Tools