Advertisement
•
Press ALM once to deactivate the alarm.
•
The alarm icon will disappear.
•
Press ALM once to activate the alarm.
•
The alarm icon will appear.
•
Press SNZ to silence an active alarm for 10 minutes.
•
The alarm icon will flash.
Press any button to stop the alarm for 24 hours.
There are four display modes to view the day, seconds, and
temperatures. If seconds are counting up on the clock, press the +
button to move or remove this feature.
Default display: month&date/weekday/indoor temperature /outdoor
temperature.
Change the display:
+
1. Press the
month&date/weekday/seconds/outdoor temperature.
+
2. Press the
month&date/weekday/indoor temperature/seconds.
+
3. Press the
month&date/seconds/indoor temperature/outdoor temperature.
+
Press the
button a fourth time and the display will return to the default
display.
•
WWVB Icon will flash when searching.
•
The WWVB icon will be steady when time signal is
received in the past 24 hours.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
The atomic clock will search for 1 hour between midnight and 6am until
the WWVB time signal is received. After reception, the atomic clock will
only search for the atomic signal after midnight.
WS-8117U-IT
Deactivate/Activate ALM
Display Features
button. The display should now show the
button a second time and the display will show the
button a third time and the display will show the
WWVB Radio-controlled Time
www.lacrossetechnology.com/support
Snooze
WWVB
Atomic Icon
Page | 3
Advertisement
