Sound & language Control
niCam reCePtion (in analogue mode only)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1
When niCam mono is received, you can select niCam mono or Fm mono.
When niCam stereo is received, you can select niCam Stereo or Fm mono.
2
If the stereo signal is weak, switch to Fm mono.
When niCam dual is received, you can select niCam dual i, niCam dual ii or
3
niCam dual i+ii or Fm mono.
SPeaKer Sound outPut SeleCtion
In AV, Component, RGB and HDMI mode, you can select output sound for the left and
right loudspeakers.
Select the sound output.
l+r: Audio signal from audio L input is sent to the left loudspeaker and audio signal from
audio R input is sent to the right loudspeaker.
l+l: Audio signal from audio L input is sent to left and right loudspeakers.
r+r: Audio signal from audio R input is sent to left and right loudspeakers.
118