Table of Contents
Advertisement
2
Press OK to start to search and store
DAB stations.
» The unit stores all the available DAB
stations.
» When all the available DAB stations
are stored, the first stored DAB station
is broadcast.
Note
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
Set clock
Note
•
You can set the clock in standby mode only.
1
Press
to switch the unit to standby.
•
Make sure that --:-- (or clock) is
displayed (see "Turn on" > "Switch to
standby").
2
Press and hold PROG/CLOCK SET to
activate the clock setting mode.
» SET CLOCK is displayed.
» The 12 hour or 24 hour format is
displayed.
3
/
Press
to select 12 hour or 24
hour format.
4
Press PROG/CLOCK SET.
» The hour digits begin to blink.
5
/
Press
to set the hour.
6
Press PROG/CLOCK SET.
» The minute digits begin to blink.
7
/
Press
to set the minute.
8
Press PROG/CLOCK SET to confirm.
Turn on
1
Press .
» The unit switches to the last selected
source.
Switch to standby
1
When the unit is turned on, press
switch the unit to standby.
•
In standby, press and hold
from normal standby to Eco power
standby or vice versa.
» In normal standby, the clock (if set)
appears on the display panel.
» In Eco power standby, the backlight on
the display panel turns off.
to
to switch
EN
13
Advertisement
Table of Contents
