Samsung 890V Installation Manual page 43

USB Cloning
¦
USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from
one TV set and upload them to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
y Cloning from TV to USB: This copy the stored data from the TV set to the
USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter Hotel Option by pressing buttons in order.
→ 1 → 1 → 9 →
− MUTE
3. Press the ▲ or ▼ button to select "Clone TV to USB", then press the
4. When the message "Clone TV to USB" is displayed, press the
5. You can Make sure USB cloning behavior.
− In Progress: during copying data to USB.
− Completed: copy operation was finished successfully.
− Failed: copy operation was not finished successfully.
− No USB: any USB is not connected.
y Cloning from USB to TV: This downloads the stored data in the USB device
to TV set.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter Hotel Option by pressing buttons in order:
3. Press the ▲ or ▼ button to select "Clone USB to TV", and then press the
4. When the message "Clone USB to TV" is displayed, then press the
5. You can Make sure USB cloning behavior.
− In Progress: during copying data to TV.
− Completed: copy operation was finished successfully.
− Failed: copy operation was not finished successfully.
− No USB: any USB is not connected.
− No File: there is no file to copy on the USB.
✎ If you insert the USB device when the TV is on, a pop-up window may appear. If this occurs, press Exit, and then
continue.
For fast, instant cloning during installation,
insert a USB driver with master settings from the first TV and press the Enter key for 5 seconds.
ENTER
MUTE
ENTER button.
ENTER button.
→ 1 → 1 → 9 →
ENTER
ENTER
ENTER button.
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
button.
English
USB USB
(5V 0.5A) (5V 0.5A)
(HDD/1.0A)
/ CLONING
HDMI IN 2 HDMI IN 2
(DVI) (DVI)
43