2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [OSD MEMORY].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f Even if [ON] is set, the cursor position is not maintained when the power is turned off.
Setting [INPUT GUIDE]
Set whether to display the input guide in the position set in [OSD POSITION].
Input guide is a screen to display information such as the currently selected input terminal name, signal name,
memory number, etc.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [INPUT GUIDE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [WARNING MESSAGE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f When [OFF] is set, a warning message is not displayed on the projected image even if a warning condition such as [TEMPERATURE
WARNING] is detected while using the projector.
The message prompting to clean/replace the filter is also not displayed.
[CLOSED CAPTION SETTING] (only when NTSC signal is input)
Set closed captions.
Selecting the closed caption display
1)
Press as to select [CLOSED CAPTION SETTING].
2)
Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
108 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Holds the cursor position.
Does not hold the cursor position.
Displays the input guide.
Hides the input guide.
Displays the warning message.
Hides the warning message.