Recording Chords (Step Recording) - Yamaha PSR-S975 Reference Manual

4
Enter the next notes and apply a tie.
4-1 Press the [G] button to select "mp."
4-2 Press the [H] button to select "Normal."
4-3 While holding G3 key on the keyboard, press the [6 ] button.
4-4 While holding the G3 key, press the C4 key.
4-5 While holding the keys G3 and C4, press the [5 ] button.
3
This enters the notes G3 and C4 notes have been entered as shown in the notation on the previous
page.

Recording Chords (Step Recording)

In Step Recording, you can record the precise change timing of chords and Sections (such as Intro, Main and
Ending) of the current Style on the single display. After the operations are finished, the recorded information
or events will be converted to the actual MIDI notes or Song data.
1
Press the SONG [REC] and SONG [J] (STOP) buttons simultaneously.
A blank Song ("New Song") is called up for recording.
Selecting a blank Song initializes the panel settings.
2
Select the Style you want to use in the Song.
3
Call up the operation display.
[FUNCTION] → TAB [F] MENU 2 → [B] SONG CREATOR → TAB [E][F] CHORD
4
Press the [G] (STEP REC) button to call up the STEP RECORD display.
62
PSR-S975/S775 Reference Manual
This operation advances the input position from the current 2nd beat to the next 3rd beat. Do not
release the G3 key yet. Keep holding it while executing the following steps.
Do not release the G3 and C4 keys yet. Keep holding the notes while carrying out the following
step.
After pressing the button, release the keys.