Table of Contents
Advertisement
Chapter 2 Preparations
11. Continue to install or remove internal optional devices, mount and connect the server, and turn the
server on.
12. Run BIOS Setup Utility (SETUP) to confirm the following settings. Refer to Chapter 2 (1. System BIOS)
in "Maintenance Guide".
Advanced → Processor Configuration → Processor Information
[CPU ID]
[L2 Cache RAM]
[L3 Cache RAM]
1.6.2 Replacement / Removal
To remove processor (CPU), reverse the installation procedure.
52
Important •
Do not remove any processor unless it is failed.
•
To remove the heat sink from the processor, first turn the heat sink to the left
and right lightly to make sure that the heat sink can be apart from the processor.
Removing the heat sink with it adhering to the processor may cause the
processor and/or CPU socket to be defected.
Express5800/E120e-M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
