•An error (Ma ERROR) occurs if parameters are not configured correctly.
Use the following functions key to maneuver between calculation result screens.
• 1(REPT) ... Parameter input screen
• 5(MEMO) ... Screen of various bond calculation values*
• 6(GRPH) ... Draws Graph
Pressing5 (MEMO) displays various bond calculation values, like those shown here.
*The interest payment date is calculated from d2 when 365 is specified for the Date Mode item
in the SET UP screen.
• w~w
• 6(GRPH)
After drawing a graph, you can press 1 (TRACE) to turn on trace and read calculation results
along the graph.
Press i to turn off trace.
Press i again to return to the parameter input screen.
26