Buffalo AirStation WHR-HP-G125 User Manual page 15

Push the AOSS button on the side of your router and hold it in for a few seconds. The
AOSS light will begin to flash amber. You now have two minutes to push the AOSS button
on your client device and finish the connection.
If you have a standalone client device,
it will probably have a little red button
labled "AOSS" on it. Push the button!
About 15 seconds later, you'll have a
secure network connection.
If your client device is a PC card,
CardBus, or PCI adaptor, the AOSS
button will probably be in its Client
Manager Software. Check your client
device's user manual for instructions
on where to push or click the AOSS
button.
After you've pressed both buttons, it will take about 15 seconds for the connection to
complete. When it's finished, the AOSS light witll glow a solid amber. You now have a
secure network connection!
AOSS (AirStation One-Touch Secure System) is a simple system for
configuring your wireless network securely. If your router and your
client device are installed and both support AOSS, then making a
secure wireless connection between them is very easy.
standalone PC card
client device
1
AOSS AOSS
Client Manager
Software