TROUBLESHOOTING
Problem
Possible
Cause
Unit will
Cord not
not start.
plugged in.
Circuit fuse
is blown.
Circuit breaker
is tripped.
Cord or switch
is damaged.
Possible Solution
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it serviced by an authorised D
agent.)
Reset circuit breaker. (If the product repeatedly causes the circuit breaker to trip,
discontinue use immediately and have it serviced by an authorised D
agent.)
Have cord or switch replaced by an authorised D
WALT repair
e
WALT repair
e
WALT repair agent.
e
EngLIsh
25