Configuring Settings With Plug&Play - Samsung UN40EH6000F Quick Start Manual

5. Configuring the Basic Settings with Plug & Play
When you turn the TV on for the first time, a sequence of prompts and screens will assist you in configuring basic
settings. Before you begin, make sure you have connected the TV to an antenna or a cable connection and that the TV
is plugged in. See "Connections" for instructions. To begin Plug and Play, press the
Plug & Play is available only when the Input source is set to TV. See "Changing the Input Source".
✎
Plug & Play
Select Language of the OSD.
Language
Plug & Play
Select 'Home Use' when installing this TV in your home.
Store Demo
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
U Move
If you have connected a cable or
✎
satellite box to an HDMI, Component,
Composite, or Antenna input, and you
will use the box to select channels, press
the Menu (m) button on your remote to
skip this step.
Auto Program
Select the cable system.
Analog STD
STD
Digital
START
U Move
1. Start Screen → Select a Language
After you press the
ENTERE button on your remote to continue.
English
On the Language screen, press the ENTERE button. Use the
Español
▲/▼buttons to select a language, and then press ENTERE again.
Français
U Move
E Enter
2. Select the Home Use Mode
On the Home Use screen, press ENTERE to select the Home Use
mode.
✎
Home Use
L Move E Enter
3. Select the Antenna Source
On the Antenna Source screen, select the source of your TV signal.
Air
If your TV is connected to an antenna Choose Air, and then press
Start
ENTERE. The TV will automatically start memorizing channels. When it
Start
is done, go to "Set the Clock Mode".
Start
Cable
If your TV is connected to a cable outlet, choose Cable, and then press
ENTERE. Go to "Select the Cable Type".
E Enter m Skip
Auto
If you choose Auto, and then press ENTERE, the TV will automatically
select the correct Antenna source. Go to "Select the Cable Type"
4. Select the Cable Type
On the Cable Type screen, use the ◄/►/▲/▼ buttons to select the type
of digital and analog cable systems you have: STD, HRC, or IRC. Most
systems are STD (Standard). When done, select Start, and then press
ENTERE. The TV will start memorizing channels.
HRC IRC
✎
HRC IRC
✎
E Enter R Return
POWER

Store Demo mode is for retail environments only.


Channel memorization can take up to 45 minutes, depending on
your cable system.
Memorized channels are added to the Added Channel list. These are
the channels you will see when you use the Channel buttons on your
remote.

button on your remote.
POWER
button, the Start Screen appears. Press the