Selecting The Heat Mode - Samsung MWR-SH00 User Manual

Selecting the Heat Mode

The Heat mode can be selected only on the heat pump models.
8
E-
Select the Heat mode to raise the room temperature.
1
Press the (ON/OFF) button to turn on the indoor unit.
(Do not press the
control is on).
Result:  T he air conditioner will be turned on with the
mode selected when the unit was last used.
Caution The air conditioner has a built-in protection
mechanism to prevent the unit from being
damaged when it is started immediately after
being:
 Plugged in
 Stopped
The air conditioner will start up after 3 minutes.
2
To select the Heat mode, press the
displayed on the remote control.
Result:
The air conditioner will run in Heat mode.
3
To adjust the temperature, press the
the desired temperature.
The temperature can be set between 16°C(61°F) and
30°C(86°F).
Result:  The temperature is adjusted by 1°C(1°F) when
the
 The air conditioner will start heating if
the temperature set is higher than the room
temperature.
 The fan will run even if the temperature set is
lower than the room temperature.
4 To adjust the fan speed, refer to page 11.
Note The Cool and Heat mode cannot be selected at
the same time.
(ON/OFF) button if the remote
button until
buttons to set
buttons are pressed.
is