Operating The Cleaner; Power Switch; Handle Positions; Height Adjustment - Samsung SU3330 User Manual

Operating the cleaner

pOwER SwITcH

The Power Switch is located on the side of the vacuum.
Push the rocker switch "ON" to vacuum, and "OFF"
when cleaning is complete.

HANDLE pOSITIONS

Press the handle release pedal, located on the lower left side of the vacuum, with
your foot to place your vacuum into one of three cleaning positions.
1. Upright
– For storage and above floor cleaning with tools.
2. Normal Cleaning
– Press handle release pedal once. Position used for
most household floor cleaning tasks.
3. Low Cleaning
– With the vacuum in normal cleaning position, press
handle release pedal again. Use for reaching under
low furniture such as tables, chairs or beds.

HEIGHT ADjUSTMENT

The Powerfoot/Rotating Floor Brush can be adjusted to clean several floor surfaces.
Note :
For optimal cleaning performance, adjust to the lowest practical setting.
If your cleaner is difficult to push, adjust to the next higher setting.
Always ensure that the correct height setting is used for your flooring type as
damage may occur if the height setting is not changed to reflect your flooring type.
1. Turn Height Adjustment Knob to desired setting.
Bare floor Setting
– For bare floors.
Medium Settings
– For short and medium pile carpets.
Highest Setting
– For plush pile carpet

TRANSpORTING cLEANER

1. To move your cleaner from room
to room, put the Handle in the
upright position, tilt the cleaner
back on its rear wheels and push
forward.
2. The cleaner can also be moved
by using the Carrying Handle located
on the top of the Dust Bin.
8_ operating the cleaner
Carrying
Handle