D-Link WUA-1340 Manual page 33

Networking Basics (continued)
Assigning a Static IP Address in Windows XP/2000
Click on Internet
Protocol (TCP/IP)
Click Properties
Input your IP address and
subnet mask. (The IP
addresses
network must be within the
same range. For example,
if one computer has an IP
address of 192.168.0.2, the
other computers should
have IP addresses that are
sequential, like 192.168.0.3
and 192.168.0.4. The
subnet mask must be the
same for all the computers
on the network.)
Input your DNS server
addresses. (Note: If you
are entering a DNS
server, you must enter
the IP address of the
Default Gateway.)
The DNS server information will be supplied
by your ISP (Internet Service Provider.)
Click OK
on your
30