Table of Contents
Advertisement
3. Click OK. The IF2 reboots and restores the default configuration.
Restore Default Settings with the Reset Switch
If you are having problems with the IF2, you can press the reset switch to restore
the default settings to the IF2.
1. Make sure the IF2 is powered on.
2. Using a paper clip, push and hold the reset switch for three seconds. The LEDs
Reset switch
3. Release the reset switch. The IF2 reboots and restores the default
Restore Default Settings with a Serial Connection
If you are having problems with the IF2, you can use a serial connection to restore
the default settings to the IF2.
1. Open a serial connection to the IF2. For help, see
2. In the login field, type restore_defaults and then press Enter.
3. In the Password field, press Enter. The IF2 reboots and the default settings are
Reboot the IF2
You can reboot the IF2 from the web browser interface as described in the next pro-
cedure. For example, you may need to reboot the IF2 to enable changes in an appli-
cation.
50
Or, click Cancel to close the confirmation message without restoring defaults.
on the IF2 flashes.
configuration.
Connection to the IF2" on page
restored.
"Open a Serial or USB
44.
IF2 Network Reader User Guide
Advertisement
Table of Contents
