Register The Handset Or Additional Handsets; Unregister Handsets - Philips Faro M775 Series Extended User Documentation

synchronized, make sure the current
year is set.
1
Select [Menu] > [Services] > [Auto
clock], then press [OK] to confirm.
2
Select [On]/[Off] . Press [OK].
» The setting is saved.
Register the handset or
additional handsets
You can register additional handsets
to the base station. The base station
can register up to 4 handsets.
1
You can register your handset as
follows:
• If the handset is in [Register
your Handset] status, press
[OK].
• If the handset is in [searching]
and [Unavailable] status, press
[Menu] > [Services] > [Register]
> [OK].
2
Press and hold
station for 10 seconds.
3
Enter the system PIN. Press [Clear]
to make corrections. Then press
[OK] to confirm the PIN.
» Registration is complete in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
on the base
Note
•
If the PIN is incorrect or no base is found
within a certain period, your handset
displays a notification message.
•
If registration fails, unplug the power adapter
from the base station and plug it back.
Wait for 15 seconds, and then repeat the
registration procedure.
•
The preset PIN is 0000. No change can be
made on it.
•
The handset and the base station are GAP
compliant, which means they guarantee the
minimum functions: register a handset, take
the line, make a call and receive a call. The
advanced features may not be available if
you use them with other makes.
•
To register the handset to another
GAP-compliant base station, follow the
registration procedure of that base station.

Unregister handsets

1
Select [Menu] > [Services] >
[Unregister], then press [OK] to
confirm.
2
Enter the system PIN. (The preset
PIN is 0000). Press [Clear] to
remove the number.
3
Select the handset number to be
unregistered.
4
Press [OK] to confirm.
» The handset is unregistered.
Tip
•
The handset name is displayed beside the
handset number in standby mode.
Note
•
A handset cannot unregister itself.
EN
39