Setting The Position Of Right And Left Channels [Pan]; Fine Tuning The Pitch (Only In Dual Mode) [Detune]; Selecting The Reverb Type [Reverbtype]; Setting The Reverb Depth [Reverbsend] - Yamaha Clavinova CLP-970A Owner's Manual

In Dual mode:
A
C
Voice for editing (Voice 1 and Voice 2)
Setting range:
0 - 127
Setting the position of right and
left channels [Pan]*
You can specify the position in the stereo image from
which you hear the sound.
See the procedure on page 66.
A
C
In Dual mode:
A
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
L64 (hard left) - C (center) - R63 (hard right)
Fine tuning the pitch (only in
Dual mode) [Detune]
You can slightly shift the pitch of two voices selected
for Dual mode.
See the procedure on page 66.
A
C
Detailed settings for the voices [VOICE SETTING]
Setting range:
–20 - +20 (With positive values, the pitch of Voice 1 is
B
raised and the pitch of Voice 2 is lowered. With nega-
NO YES
tive values, the pitch of Voice 1 is lowered and the pitch
of Voice 2 is raised.)
D
Selecting the reverb type
[ReverbType]
You cannot set this parameter for the voice parts "Left" and
"LeftXLayer."
See the procedure on page 66.
A
B
NO YES C
Setting range:
D Room Simulates reverberation in a room.
Hall Simulates reverberation in a concert hall.
Hall2 Reverberation is slightly longer than that of
B
"Hall1."
Stage Reverberation suitable for a solo instrument
NO YES
sound.
Plate Reverberation from the vibration of a metal
D
plate.
Setting the reverb depth
[ReverbSend]*
The reverb effect is not applied if the ReverbSend parameter
is set to "0."
See the procedure on page 66.
A
B
NO YES
C
D
TIP
TIP
B
NO YES
D
B
NO YES
D
73
CLP-970A