Table of Contents
Advertisement
Operating the appliance
en
Water&Rinse+
ë
Adjustment values:
+1
+ 1 rinse
+2
+ 2 rinses
+3
+ 3 rinses
off
Setting deselected
Higher water level and additional rinse
cycles depending on the programme,
longer programme duration for
particularly sensitive skin and/or for
areas with very soft water.
The number of rinse cycles that the
appliance actually runs depends on the
number that is set as a basic setting for
the program in question.
Prewash
T
For heavily soiled laundry.
Notes
If intelligent dosage is selected, the
■
detergent will be dispensed
automatically for the prewash and
the main wash.
For heavily soiled laundry, medium i-
■
DOS dosing is usually sufficient
when selecting a programme with
pre-wash.
If dosing manually, allocate
■
detergent to the prewash and the
main wash. Place detergent for the
prewash in the drum and add
washing powder for the main wash
to the left-hand compartment.
16
1
Operating the
appliance
P reparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
From ~ Page 34
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cottons programme set at the
factory is then always displayed.
The current settings and programme
information light up at full brightness
and the display A flashes.
The settings that can be selected light
up at half brightness.
Notes
Temporary flashing of the displayÛ
■
informs you to run the programme
Drum Clean or any other
programme soon at a washing
temperature of at least 60 °C.
If the E 3 sec display flashes, the
■
childproof lock is active.
You must deactivate this first before
you can change settings or start the
programme. ~ Page 18
Advertisement
Table of Contents
