Fujitsu ScanSnap iX1400 Basic Operation Manual page 94

Example: iX100
a The [Scan/Stop] button flashes in blue. The button returns to being lit normally when
document scanning is enabled.
Press the [Scan] or [Stop] button on the ScanSnap.
ATTENTION
When turning the power on, do not cover the white sheet with a hand.
a The [Scan] button lights up in blue.
When the ScanSnap is turned on, the ScanSnap Manager icon in the notification area changes
from to .
ATTENTION
For iX1600/iX1500/iX1400/iX500/iX100/S1300i/S1100i, with some computers, the initialization of
the ScanSnap may be performed several times when the computer is started up depending on
some computers.
HINT
l It may take more time for the ScanSnap Manager icon in the notification area to change to
depending on computer performance, operating environment, or loading, for example,
when many software programs are running at the same time.
l When the ScanSnap is turned on, a notification informs you of the ScanSnap's
communication status.
To disable notifications of the ScanSnap's communication status, change the setting in the
following procedure:
1. Right-click the ScanSnap Manager icon
[Preferences] from the
a The [ScanSnap Manager - Preferences] window appears.
[Stop] Button
[Scan] Button
"Right-Click Menu" (page
94
Turning the ScanSnap On or Off
in the notification area and select
87).