Advertisement
Quick Links
1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4
2. COOKTOP MEASUREMENTS ............................................................................................... 5
3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS .................................... 6
3.1 Gas supply requirements ................................................................................................................................ 8
3.2 Electrical requirements .................................................................................................................................... 9
4. INSTALLING THE COOKTOP ............................................................................................... 11
5. CHECKING OPERATION ...................................................................................................... 14
6. WIRING DIAGRAMS ............................................................................................................. 15
WARNING: For your safety, the information in this manual must be followed to minimize the risk
of fire or explosion, or to prevent property damage, personal injury or death.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
•
Do not attempt to switch on any appliances.
•
Do not touch any electrical switches.
•
Do not use any phones in your building.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
•
lf you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified engineer who is able to
install, commission and test the appliance
Table of Contents
WHAT TO DO IF YOU SMELL GAS
3
Advertisement
Related Manuals for Smeg PGFU30X
Summary of Contents for Smeg PGFU30X
-
Page 1: Table Of Contents
Table of Contents 1. IMPORTANT SAFETY INSTRUCTIONS ................. 4 2. COOKTOP MEASUREMENTS ....................5 3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS ........6 3.1 Gas supply requirements ..........................8 3.2 Electrical requirements ............................ 9 4. INSTALLING THE COOKTOP ....................11 5. -
Page 2: Important Safety Instructions
Important Safety Instruction 1. IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS – Your Safety And the Safety of Others Are Very Important. We have provided many important safety messages throughout this manual and on your appliance. Read all instructions before using your appliance and always obey all safety messages. RECOGNIZE SAFETY INFORMATION This is a safety alert symbol. -
Page 3: Cooktop Measurements
Instructions for the Installer 2. COOKTOP MEASUREMENTS... -
Page 4: Positioning The Cooktop And Location Requirements
Instructions for the Installer 3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS NOTE: The following operation requires building and/or carpentry work and must therefore be carried out by a competent technician. Installation can be carried out on various material, such as masonry, metal, solid wood, plastic laminated wood etc. - Page 5 Instructions for the Installer Cooktop MINIMUM DISTANCE widht 2 ” 2 ” 2 ” ” ” ” ” ” 760 mm 700 mm 492 mm 210 mm 720 mm 50 mm 50 mm 50 mm NOTE: 13" (330 mm) is the maximum recommended upper cabinet depth. Gas line opening Wall: everywhere, 5”...
-
Page 6: Gas Supply Requirements
Instructions for the Installer 3.1 Gas supply requirements EXPLOSION HAZARD Use a new AGA- or CSA-approved gas supply line. - The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the cooktop. It should be in a location that allows ease of opening and closing. -
Page 7: Electrical Requirements
Instructions for the Installer The regulator must be checked at a minimum water column of at least 1” w.c. above the set pressure. The inlet pressure to the regulator should be as follows for operation and monitoring of the regulator setting: - NATURAL GAS: Set pressure at 4”... - Page 8 Instructions for the Installer 3.2.1 Recommended Grounding Method For your personal safety, this cooktop must be grounded. This cooktop is equipped with a 3-prong ground plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong ground-type outlet, grounded in accordance with the National ANSI/NFPA 70 Electrical Code (latest edition*) or the Canadian Electrical Code (CSA)** and local codes and ordinances.
-
Page 9: Installing The Cooktop
Instructions for the Installer 4. INSTALLING THE COOKTOP Remove the pol y styrene support and lift the hob to extract it from the side supports and the box. Connection to the gas mains may be made with a flexible metal pipe and conforming to the provisions defined by current standard regulations in force. - Page 10 Instructions for the Installer Carefully position the gasket provided all around the outer edge of the hole inthe work surface as shown in picture 1, pressing it down lightly to ensure it adheres properly. The front and rear sides of the gasket must skim the hole.
- Page 11 Instructions for the Installer Always use pipe-joint compound made for use with NATURAL GAS and L.P. GAS between pressure regulator D and adaptator C and between pressure regulator D and pipe E. If flexible metal conductor is used, be certain tubing is not kinked. Use only pipes (E) conforming to standard regulations in force, inserting gasket B (supplied) between fitting A adaptator C.
-
Page 12: Checking Operation
Instructions for the Installer 5. CHECKING OPERATION After having fastened the top to the support structure, some simple procedures are required to check for proper operation. Check for any gas leaks in the vicinity of the cooktop connector, the pressure regulator and the safety valve. -
Page 13: Wiring Diagrams
Instructions for the Installer 6. WIRING DIAGRAMS The power cord on this appliance is equipped with a threee pronge polarized plug (grounding) which mates with standard three pronged (grounding) wall receptacles. Label all wires prior to disconnection when servicing controls. WARNING Wiring errors can cause improper and dangerous operation.