Operation Manual / A150-M56/66/57/67 - A155-M..
10 Dismantling and fitting with removed air inlet and gas outlet / 10.6
Removing the cartridge group
Fig. 60: Removing cartridge group 2
If the cartridge group cannot be loosened, the press-off tool (90042) can be used.
4. Secure the first set of lifting gear to the bearing casing.
5. Secure the second set of lifting gear to the service support with a swivel lifting eye. The
length of the lifting gear must be selected in such a way that the compressor wheel is
not touched when turning the cartridge group.
6. Remove the cartridge group vertically from the turbine casing.
© Copyright 2021 ABB. All rights reserved.
HZTL4032_EN
Rev.Q
January 2021